This reminds me of an excellent series of lectures I once attended about how you can't have practical skyscrapers without inventing the elevator, you can't have practical automobiles without inventing the windshield wiper, and you can't have practical electric lighting without inventing a whole lot of power generation and distribution technology, or efficient vacuum pumps.
Every big invention depends on hundreds or thousands of other ones you don't hear as much about.
seems silly to embrace the design of a plane that is made to move 2 static length blades when even longer blades have been shown to continue the trend of cheaper MW.
the article mentions that 3d printing is a no-go due to the facility needed to print the blade in -- seems like it'd be better to pursue an unfolding container factory with a printer in it and how to transport that thing with conventional craft than to go all-in on a new unproven airframe made for very specific parts.
plus that way the length of the product isn't set in stone, either.
I say this as a total layman -- i'm just taking the articles stated reason for no 3d printing and running with it.
Sadly, an LLM rejected my idea of building an enormous helicopter drone from wind turbine blades. They can't spin fast enough to generate sufficient lift.
Alternative, can you make a turbine blade that can be an (inefficient) wing when bolted to a fuselage and engine? Effectively fly the blade there, using it as a lifting surface area.
It's a fairly straightforward physics question, and Gemini Pro thinks the thrust to weight ratio is too low, by more than an order of magnitude, even before adding the weight of the frame and propulsion system.
Straightforward physics suggests the lift is a function of how fast you spin them. I'm sure with a fast enough spin you could get enough lift. Maybe rocket engines on the tips?
Still subsonic speeds can produce a lot of lift. I mean jet aircraft weighing 200 tons lift off at about 160 mph. But googling wing tip thrust, jet engines are probably more practical than rockets.
I assumed this was already being done for the massive offshore models. Setup some kind of minimal plant on shore so you minimize transportation to the boats.
Were we not getting airships for this purpose? The ones with a butt?
A diagram comparing it to the 747s and oil tankers mentioned in the text would have been appreciated.
OK, looked it up. 108m v 72m. Kvikk diagram, pretty much to scale:
(what is a kvikk diagram - google isn’t helping here)
wild guess: a distorted "quick"
Brain glitch. I’d just read this - https://www.bbc.com/travel/article/20250909-kvikk-lunsj-the-...
I hope you'll have just coined a new diagram name: Kvikk = simple ASCII diagram that trivially illuminates a technical matter =)
bonus points that mainstream LLM’s can trivially train on them and produce them. =)
Kool and thx. 72 and 108 divide cleanly by 9, so it’s pretty dang accurate too.
This reminds me of an excellent series of lectures I once attended about how you can't have practical skyscrapers without inventing the elevator, you can't have practical automobiles without inventing the windshield wiper, and you can't have practical electric lighting without inventing a whole lot of power generation and distribution technology, or efficient vacuum pumps.
Every big invention depends on hundreds or thousands of other ones you don't hear as much about.
seems silly to embrace the design of a plane that is made to move 2 static length blades when even longer blades have been shown to continue the trend of cheaper MW.
the article mentions that 3d printing is a no-go due to the facility needed to print the blade in -- seems like it'd be better to pursue an unfolding container factory with a printer in it and how to transport that thing with conventional craft than to go all-in on a new unproven airframe made for very specific parts.
plus that way the length of the product isn't set in stone, either.
I say this as a total layman -- i'm just taking the articles stated reason for no 3d printing and running with it.
Maybe the idea is: gain expertise in making, loading, flying, and landing 100m planes this year, and try 150m planes next year.
Sadly, an LLM rejected my idea of building an enormous helicopter drone from wind turbine blades. They can't spin fast enough to generate sufficient lift.
Alternative, can you make a turbine blade that can be an (inefficient) wing when bolted to a fuselage and engine? Effectively fly the blade there, using it as a lifting surface area.
Why is that sad? That's way outside LLM training sets.
It's a fairly straightforward physics question, and Gemini Pro thinks the thrust to weight ratio is too low, by more than an order of magnitude, even before adding the weight of the frame and propulsion system.
Straightforward physics suggests the lift is a function of how fast you spin them. I'm sure with a fast enough spin you could get enough lift. Maybe rocket engines on the tips?
The tips need to stay subsonic. A bigger rotor must turn slower. AFAIK the tips of current wind turbines are already close to this limit.
Still subsonic speeds can produce a lot of lift. I mean jet aircraft weighing 200 tons lift off at about 160 mph. But googling wing tip thrust, jet engines are probably more practical than rockets.
craft the blades onsite?
I assumed this was already being done for the massive offshore models. Setup some kind of minimal plant on shore so you minimize transportation to the boats.