Everyone's suggestions feel designed to frustrate me. Instructions on how to cajole and plead that seem more astrology than engineering.
This is the pattern I settled on about a year ago. I use it as a rubber-duck / conversation partner for bigger picture issues. I'll run my code through it as a sanity "pre-check" before a pr review. And I mapped autocomplete to ctrl-; in vim so I only bring it up when I need it.
Otherwise, I write everything myself. AI written code never felt safe. It adds velocity but velocity early on always steals speed from the future. That's been the case for languages, for frameworks, for libraries, it's no different for AI.
In other words, you get better at using AI for programming by recognizing where its strengths lie and going all in on those strengths. Don't twist up in knots trying to get it to do decently what you can already do well yourself.
Hey, Boris from the Claude Code team here. A few tips:
1. If there is anything Claude tends to repeatedly get wrong, not understand, or spend lots of tokens on, put it in your CLAUDE.md. Claude automatically reads this file and it’s a great way to avoid repeating yourself. I add to my team’s CLAUDE.md multiple times a week.
2. Use Plan mode (press shift-tab 2x). Go back and forth with Claude until you like the plan before you let Claude execute. This easily 2-3x’s results for harder tasks.
3. Give the model a way to check its work. For svelte, consider using the Puppeteer MCP server and tell Claude to check its work in the browser. This is another 2-3x.
4. Use Opus 4.5. It’s a step change from Sonnet 4.5 and earlier models.
> If there is anything Claude tends to repeatedly get wrong, not understand, or spend lots of tokens on, put it in your CLAUDE.md. Claude automatically reads this file and it’s a great way to avoid repeating yourself.
Sure, for 4/5 interactions then will ignore those completely :)
Try for yourself: add to CLAUDE.md an instruction to always refer to you as Mr. bcherny and it will stop very soon. Coincidentally at that point also loses tracks of all the other instructions.
One of the things you get an intuition for after using these systems is when to start a new conversation, and the basic rule of thumb is “always.” Use a conversation for one and only one task or question, and then start a new one. For longer projects, have the LLM write down a plan or checklist, and then have it tackle each step in a new conversation. The LLM context collapse happens well before you hit the token limits, and things like ground rules and whatnot stop influencing the LLMs outputs after a couple tens of thousands of tokens in my experience.
(Similar guidance goes for writing tools & whatnot - give the LLM exactly and only what it needs back from a tool, don’t try to make it act like a deterministic program. Whether or not they’re capital-I intelligent, they’re pretty fucking stupid.)
Yeah, adherence is a hard problem. It should be feeling much better in newer models, especially Opus 4.5. I generally find that Opus listens to me the first time.
Yes. One of my system-wide instructions is “Read the Claude.md file and any readme in the current directory, then tell me how you slept.”
If Claude makes a yawn or similar, I know it’s parsed the files. It’s not been doing so the last week or so, except for once out of five times last night.
That explains why it happens, but doesn't really help with the problem. The expectation I have as a pretty naive user, is that what is in the .md file should be permanently in the context. It's good to understand why this is not the case, but it's unintuitive and can lead to frustration. It's bad UX, if you ask me.
I'm sure there are workarounds such as resetting the context, but the point is that god UX would mean such tricks are not needed.
I'm surprised this hasn't been been automated yet but I'm pretty naive to the space - the problem of "when?"/"how often?" seems like a fun one to chew on
I know the reason, I just took the opportunity of answering to a claude dev to point out why it's no panacea and how this requires consistent context management.
Real semi-productive workflow is really a "write plans in markdowns -> new chat -> implement few things -> update plans -> new chat, etc".
Some things I found from my own interactions across multiple models (in addition to above):
- It's basically all about the importance of (3). You need a feedback loop (we all do). and the best way is for it to change things and see the effects (ideally also against a good baseline like a test suite where it can roughly guage how close or far it is from the goal.) For assembly, a debugger/tracer works great (using batch-mode or scripts as models/tooling often choke on such interactivie TUI io).
- If it keeps missing the mark tell it to decorate the code with a file log recording all the info it needs to understand what's happening. Its analysis of such logs normally zeroes the solution pretty quickly, especially for complex tasks.
- If it's really struggling, tell it to sketch out a full plan in pseudocode, and explain why that will work, and analyze for any gotchas. Then to analayze the differences between the current implementation and the ideal it just worked out. This often helps get it unblocked.
I couldn't agree more. And using Plan mode was a major breakthrough for me. Speaking of Plan Mode...
I was previously using it repeatedly in sessions (and was getting great results). The most recent major release introduced this bug where it keeps referring back to the first plan you made in a session even when you're planning something else (https://github.com/anthropics/claude-code/issues/12505).
I find this bug incredibly confusing. Am I using Plan Mode in a really strange way? Because for me this is a showstopper bug–my core workflow is broken. I assume I'm using Claude Code abnormally otherwise this bug would be a bigger issue.
Yes as lostdog says, it’s a new feature that writes plans in plan mode to ~/.claude/plans. And it thinks it needs to continue the same plan that it started.
So you either need to be very explicit about starting a NEW plan if you want to do more than one plan in a session, or close and start a new session between plans.
Hopefully this new feature will get less buggy. Previously the plan was only in context and not written to disk.
Yes, I've also been confused by things like this. Claude code is sometimes saving plans to ~/.claude/plans under animal names. But it's not really surface where the plan goes, not what the expected way to refer back to them is?
Thank you for Claude Code (Web). Google has a similar offering with Google Jules. I got really, really bad results from Jules and was amazed by Claude Code when I finally discovered it.
I compared both with the same set of prompts and Claude Code seemed to be a senior expert developer and Jules, well don't know who be that bad ;-)
Anyway, I also wanted to have persistent information, so I don't have to feed Claude Code the same stuff over and over again. I was looking for similar functionality as Claude projects. But that's not available for Claude Code Web.
So, I asked Claude what would be a way of achieving pretty the same as projects, and it told me to put all information I wanted to share in a file with the filename:.clinerules. Claude told me I should put that file in the root of my repository.
So please help me, is your recommendation the correct way of doing this, or did Claude give the correct answer?
Maybe you can clear that up by explaining the difference between the two files?
Do you recommend having Claude dump your final plan into a document and having it execute from that piece by piece?
I feel like when I do plan mode (for CC and competing products), it seems good, but when I tell it to execute the output is not what we planned. I feel like I get slightly better results executing from a document in chunks (which of course necessitates building the iterative chunks into the plan).
I ask it to write a plan and when it starts the work, keep progress in another document and to never change the plan. If I didn't do this, somehow with each code change the plan document would grow and change. Keeping plan and progress separate prevented this from happening.
I ask claude to dump the plan into a file and ensure that the tasks have been split into subtasks such that the description of each subtask meets the threshold such that the probability of the LLM misinterpreting is very low.
yes the executor only needs the next piece of the plan.
I tend to plan in an entirely different environment, which fits my workflow and has the added benefit of providing a clear boundary between the roles. I aim to spend far more time planning than executing. if I notice getting more caught up in execution than I expected, that's a signal to revise the plan.
I often use multiple documents to plan things that are too large to fit into a single planning mode session. It works great.
You can also use it in conjunction with planning mode—use the documents to pin everything down at a high-to-medium level, then break off chunks and pass those into planning mode for fine-grained code-level planning and a final checking over before implementation.
Something to keep in mind is if your CLAUDE.md file is getting large, consider alternative approaches especially for repeatable tasks. Using slash commands and skills for workflows that are repeatable is a really nice way to keep your rules file from exploding. I have slash commands for code review, and git commit management. I have skills for complex tool interactions. Our company has it's own deployment CLI tool so using skills to make Claude Code an expert at using this tool has done wonders to improve Claude Codes performance when working on CI/CD problems.
I am currently working on a new slash command /investigate <service> that runs triage for an active or past incident. I've had Claude write tools to interact with all of our partner services (AWS, JIRA, CI/CD pipelines, GitLab, Datadog) and now when an incident occurs it can quickly put together an early analysis of a incident finding the right people to involve (not just owners but people who last touched the service), potential root causes including service dependency investigations.
I am putting this through it's paces now but early results are VERY good!
I’ve been fine tuning mine pretty often. Do you have any Claude.md files you can share as good examples? Especially with opus 4.5.
And thank you for your work!! I focus all of my energy on helping families stay safe online, I make educational content and educational products (including software). Claude Code has helped me amplify my efforts and I’m able to help many more families and children as a result. The downstream effects of your work on Claude Code are awesome! I’ve been in IT since 1995 and your tools are the most powerful tools I’ve ever used, by far.
1k tokens, google says thats about 750 words. That's actually pretty short, any chance you could post a few samples of instructions or even link to a publicly available file CLAUDE.md you recommend?
That is seriously short. I've asked Claude Code to add instructions to CLAUDE.md and my one line request has resulted in tens of lines added to the file.
yes if you tell llm to do things it will be too verbose. either explicitly instruct the length ("add 5 lines bulletpoints, tldr format") or just write it yourself.
+1 on that
Opus 4.5 is a game changer
I have used to refactor and modernize one of my old react project using bootstrap,
You have to be really precise when prompting and having solid CLAUDE.md works really well
That will moves stuff that required manually clarifying back into the claude.md (or a useful subset you pick). It does a much better job of authoring claude.md than I do.
One other feature with CLAUDE.md I’ve found useful is imports: prepending @ to a file name will force it to be imported into context. Otherwise, whether a file is read and loaded to context is dependent on tool use and planning by the agent (even with explicit instructions like “read file.txt”). Of course this means you have to be judicial with imports.
> 1. If there is anything Claude tends to repeatedly get wrong, not understand, or spend lots of tokens on, put it in your CLAUDE.md.
What a joke. Claude regularly ignores the file. It is a toss up: we were playing a game at work to guess which items will it forget first: to run tests, formatter, linter etc. This is despite items saying ABSOLUTELY MUST, you HAVE To and so long.
I have cancelled my Claude Max subscription. At least Codex doesn’t tell me that broken tests are unrelated to its changes or complain that fixing 50 tests is too much work.
Hah, that's funny. Claude can't help but mess all the comments in the code up even if I explicitly tell it to not change any comments five times. That's literally the experience I had before opening this thread, never mind how often it completely ignores CLAUDE.md.
I’ve yet to see any real work get done with agents. Can you share examples or videos of real production level work getting done? Maybe in a tutorial format?
My current understanding is that it’s for demos and toy projects
Good question. Why hasn't there been a profusion of new game-changing software, fixes to long-standing issues in open-source software, any nontrivial shipped product at all? Heck, why isn't there a cornucopia of new apps, even trivial ones? Where is all the shovelware [0]? Previous HN discussion here [1].
Don't get me wrong, AI is at least as game-changing for programming as StackOverflow and Google were back in the day. I use it every day, and it's saved me hours of work for certain specific tasks [2]. But it's simply not a massive 10x force multiplier that some might lead you to believe.
I'll start believing when maintainers of complex, actively developed, and widely used open-source projects (e.g. ffmpeg, curl, openssh, sqlite) start raving about a massive uptick in positive contributions, pointing to a concrete influx of high-quality AI-assisted commits.
"Heck, why isn't there a cornucopia of new apps, even trivial ones?"
There is. We had to basically create a new category for them on /r/golang because there was a quite distinct step change near the beginning of this year where suddenly over half the posts to the subreddit were "I asked my AI to put something together, here's a repo with 4 commits, 3000 lines of code, and an AI-generated README.md. It compiles and I may have even used it once or twice." It toned down a bit but it's still half-a-dozen posts a day like that on average.
Some of them are at least useful in principle. Some of them are the same sorts of things you'd see twice a month, only now we can see them twice a week if not twice a day. The problem wasn't necessarily the utility or the lack thereof, it was simply the flood of them. It completely disturbed the balance of the subreddit.
To the extent that you haven't heard about these, I'd observe that the world already had more apps than you could possibly have ever heard about and the bottleneck was already marketing rather than production. AIs have presumably not successfully done much about helping people market their creations.
Well, the LLM industry is not completely without results. We do have ever increasing frequency of outages in major Internet services...Somehow correlates with the AI mandates major tech corps seem to pushing now internally.
Wasn't most of that caused by that one change in 2022 to how R&D expenses are depreciated, thus making R&D expenses (like retaining dev staff) less financially attractive?
Same thing happened to farmers during the industrial revolution, same thing happened to horse drawn carriage drivers, same thing happened to accountants when Excel came along, mathmaticins, and on and on the list goes. Just part of human peogress.
I use GitHub Copilot in Intellij with Claude Sonnet and the plan mode to implement complete features without me having to code anything.
I see it as a competent software developer but one that doesn't know the code base.
I will break down the tasks to the same size as if I was implementing it. But instead of doing it myself, I roughly describe the task on a technical level (and add relevant classes to the context) and it will ask me clarifying questions. After 2-3 rounds the plan usually looks good and I let it implement the task.
This method works exceptionally well and usually I don't have to change anything.
For me this method allows me to focus on the architecture and overall structure and delegate the plumbing to Copilot.
It is usually faster than if I had to implement it and the code is of good quality.
The game changer for me was plan mode. Before it, with agent mode it was hit or miss because it forced me to one shot the prompt or get inaccurate results.
I've been writing an experimental pipeline-based web app DSL with Claude Code for the last little while in my spare time. Sort of bash-like with middleware for lua, jq, graphql, handlebars, postgres, etc.
Ah yes of course. But no one asked for the code really. Just show us the app. Or is it some kinda super-duper secret military stuff you are not even supposed to discuss, let alone show.
The app is definitely still a bit rough around the edges but it was developed in breakneck speed over the last few months - I've probably seen an overall 5x acceleration over pre-agentic development speed.
I use Junie to get tasks done all the time. For instance I had two navigation bars in an application which had different styling and I told it make the second one look like the first and... it made a really nice patch. Also if I don't understand how to use some open source dependency I check the project out and ask Junie questions about it like "How do I do X?" or "How does setting prop Y have the effect of Z?" and frequently I get the right answer right away. Sometimes I describe a bug in my code and ask if it can figure it out and often it does, ask for a fix and often get great results.
I have a React application where the testing situation is FUBAR, we are stuck on an old version of React where tests like enzyme that really run react are unworkable because the test framework can never know that React is done rendering -- working with Junie I developed a style of true unit tests for class components (still got 'em) that tests tricky methods in isolation. I have a test file which is well documented explaining the situation around tests and ask "Can we make some tests for A like the tests in B.test.js, how would you do that?" and if I like the plan I say "make it so!" and it does... frankly I would not be writing tests if I didn't have that help. It would also be possible to mock useState() and company and might do that someday... It doesn't bother me so much that the tests are too tightly coupled because I can tell Junie to fix or replace the tests if I run into trouble.
For me the key things are: (1) understanding from a project management perspective how to cut out little tasks and questions, (2) understanding enough coding to know if it is on the right track (my non-technical boss has tried vibe coding and gets nowhere), (3) accepting that it works sometimes and sometimes it doesn't, and (4) recognizing context poisoning -- sometimes you ask it to do something and it gets it 95% right and you can tell it to fix the last bit and it is golden, other times it argues or goes in circles or introduces bugs faster than it fixes them and as quickly as you can you recognize that is going on and start a new session and mix up your approach.
Manually styling two similar things the same way is a code smell. Ask the ai to make common components and use them for both instead of brute forcing them to look similar.
Yeah, I thought about this in that case. I tend to think the way you do to the extent that it is sometimes a source of conflict with other people I work with.
These navbars are similar but not the same, both have a pager but they have other things, like one has some drop downs and the other has a text input. Styled "the same" means the line around the search box looks the same as the lines around the numbers in the pager, and Junie got that immediately.
In the end the patch touched css classes in three lines of one file and added a css rule -- it had the caveat that one of the css classes involved will probably go away when the board finally agrees to make a visual change we've been talking about for most of a year but I left a comment in the first navbar warning about that.
There are plenty of times I ask Junie to try to consolidate multiple components or classes into one and it does that too as directed.
I know of many experienced and capable engineers working on complex stuff who are driving basically all their development through agents. This includes production level work. This is the norm now in the SV startup world at least.
You don't just YOLO it. You do extensive planning when features are complex, and you review output carefully.
The thing is, if the agent isn't getting it to the point where you feel like you might need to drop down and edit manually, agents are now good enough to do those same "manual edits" with nearly 100% reliability if you are specific enough about what you want to do. Instead of "build me x, y, z", you can tell it to rename variables, restructure functions, write specific tests, move files around, and so on.
So the question isn't so much whether to use an agent or edit code manually—it's what level of detail you work at with the agent. There are still times where it's easier to do things manually, but you never really need to.
The real secret to agent productivity is letting go of your understanding of the code and trusting the AI to generate the proper thing. Very pro agent devs like ghuntley will all say this.
And it makes sense. For most coding problems the challenge isn’t writing code. Once you know what to write typing the code is a drop in the bucket. AI is still very useful, but if you really wanna go fast you have to give up on your understanding. I’ve yet to see this work well outside of blog posts, tweets, board room discussions etc.
> The real secret to agent productivity is letting go of your understanding of the code and trusting the AI to generate the proper thing
The few times I've done that, the agent eventually faced a problem/bug it couldn't solve and I had to go and read the entire codebase myself.
Then, found several subtle bugs (like writing private keys to disk even when that was an explicit instruction not to). Eventually ended up refactoring most of it.
It does have value on coming up with boilerplate code that I then tweak.
fixing code now is orders of magnitude cheaper than fixing it in month or two when it hits production.
which might be fine if you're doing proof of concept or low risk code, but it can also bite you hard when there is a bug actively bleeding money and not a single person or AI agent in the house that knows how anything work
That's just irresponsible advice. There is so little actual evidence of this technology being able to produce high quality maintainable code that asking us to trust it blindly is borderline snake-oil peddling.
I agree and am the same. Using them to enhance my knowledge and as well as autocomplete on steroids is the sweet spot. Much easier to review code if im “writing” it line by line.
I think the reality is a lot of code out there doesn’t need to be good, so many people benefit from agents etc.
You can use an agent while still understanding the code it generates in detail. In high stakes areas, I go through it line by line and symbol by symbol. And I rarely accept the first attempt. It’s not very different from continually refining your own code until it meets the bar for robustness.
Agents make mistakes which need to be corrected, but they also point out edge cases you haven’t thought of.
Not to blow your bubble, but I've seen agents expose Stripe credentials by hardcoding them as text into a react frontend app, so, no kids, do not "let go" of code understanding, lest you want to appear as the next story along the lines of "AI dropped my production database".
A lot of that would be people working on proprietary code I guess. And most of the people I know who are doing this are building stuff, not streaming or making videos. But I'm sure there must be content out there—none of this is a secret. There are probably engineers working on open source stuff with these techniques who are sharing it somewhere.
The Claude MD is like the documentation you hand to a new engineer on your team that explains details about your code that they wouldn't otherwise know. It's not bad to need one.
Consider that every time you start a session with Claude Code. It's effectively a new engineer. The system doesn't learn like a real person does, so for it to improve over time you need to manually record the insights that for a normal human would be integrated by the natural learning process.
Yes, that's exactly the problem. There's good reasons why any particular team doesn't onboard new engineers each day, going all the way back to Fred Brooks and "adding more people to a late project makes it later".
I certainly could be updating the documentation for new devs very frequently - the problem with devs is that they don't bother reading the documentation.
If you are consistent with how you do your projects you shouldn't need to update CLAUDE.md nearly every day. Early on, I was adjusting it nearly every day for maybe a couple of projects but now I have very little need to make any adjustments.
Often the challenge is users aren't interacting with Claude Code about their rules file. If Claude Code doesn't seem to be working with you ask it why it ignore a rule. Often times it provides very useful feedback to adjust the rules and no longer violate them.
Another piece of advice I can give is to clear your context window often! Early in my start in this I was letting the context window auto compact but this is bad! Your model is it's freshest and "smartest" when it has a fresh context window.
You might be misunderstanding what a CLAUDE.md is. It’s not about fighting the model, rather it’s giving the model a shortcut to get the context it needs to do its work. You don’t have to have one. Ours is 100% written by Claude itself.
There's a counterintuitive pricing aspect of Opus-sized LLMs in that they're so much smarter that in some cases, it can solve the problem faster and with much fewer tokens that it can end up being cheaper.
God bless these generously benevolent corporations, giving us such amazing services for the low low price of only $200 per month. I'm going to subscribe right now! I almost feel bad, it's like I'm stealing from them.
That $200 a month is getting me $2000 a month in API equivalent tokens.
I used to spend $200+ an hour on a single developer. I'm quite sure that benevolence was a factor when they submitted me an invoice, since there is no real transparency if I was being overbilled or not or that the developer acted in my best interest rather than theirs.
I'll never forget that one contractor who told me he took a whole 40 hours to do something he could have done in less than that, specifically because I allocated that as an upperbound weekly budget to him.
> That $200 a month is getting me $2000 a month in API equivalent tokens.
Do you ever feel bad for basically robbing these poor people blind? They're clearly losing so much money by giving you $1800 in FREE tokens every month. Their business can't be profitable like this, but thankfully they're doing it out of the goodness of their hearts.
I'm not sure that you actually expect to be taken seriously if you're going to assert that these companies don't have costs themselves to deliver their services.
Same, I use Playwright all the time, but haven't been able to make puppeteer work in quite some time. Playwright, while reliable in terms of features, just absolutely eats the heck out of context.
Hey Boris from the Claude Code team - could you guys please be so kind so as to stop pushing that narrative about CLAUDE.md, either yourselves or through influencers and GenAI-grifters? The reason being, it is simply not true. A lot of the time the instructions will be ignored. Actually, the term "ignored" is putting the bar too high, because your tool does not intentionally "ignore", not having sentience and knowledge. We experience the effects of the instructions being ignored, because your software is not deterministic, its merely guessing the next token, and sometimes those instructions tacked onto the rest of the context statistically do not match what we as humans expect to see (while its perfectly logical for your machine learning text generator, based on the datasets it was trained on).
Is it really just a personal anecdote ? Please do read some other comments on this post. The snark comes from everyone and their mother recommending "just write CLAUDE.md", when it is clear that this technology does not have intrinsic capability to perform reliable outputs based on human language input.
I should not have to fight tooling, especially the supposedly "intelligent" one. What's the point of it, if we have to always adapt to the tool, instead of the other way around?
I am sorry but what do I have to learn? That the tool does not work as advertised? That sometimes it will work as advertised, sometimes not? That it will sometimes expose critical secrets as plain text and some other time suggest to solve a problem in a function by removing the function code completely? What are you even talking about, comparing to shell and text editors? These are still bloody deterministic tools. You learn how they work and the usage does not change unpredictably every day! How can you learn something that does not have predictable outputs?
It's like having Michael Jordan with dementia on your team. You start out mesmerized by how many points he can score, and then you get incredibly frustrated that he forgets he has to dribble and shoot into the correct hoop.
I understand you're trying to be helpful but the number of "you're holding it wrong" things I read about this tool — any AI tool — just makes me wonder who vibe coders are really doing all this unpaid work for.
Using voice transcription is nice for fully expressing what you want, so the model doesn't need to make guesses. I'm often voicing 500-word prompts. If you talk in a winding way that looks awkward when in text, that's fine. The model will almost certainly be able to tell what you mean. Using voice-to-text is my biggest suggestion for people who want to use AI for programming
(I'm not a particularly slow typer. I can go 70-90 WPM on a typing test. However, this speed drops quickly when I need to also think about what I'm saying. Typing that fast is also kinda tiring, whereas talking/thinking at 100-120 WPM feels comfortable. In general, I think just this lowered friction makes me much more willing to fully describe what I want)
You can also ask it, "do you have any questions?" I find that saying "if you have any questions, ask me, otherwise go ahead and build this" rarely produces questions for me. However, if I say "Make a plan and ask me any questions you may have" then it usually has a few questions
I've also found a lot of success when I tell Claude Code to emulate on some specific piece of code I've previously written, either within the same project or something I've pasted in
> I'm not a particularly slow typer. I can go 70-90 WPM on a typing test. However, this speed drops quickly when I need to also think about what I'm saying. Typing that fast is also kinda tiring, whereas talking/thinking at 100-120 WPM feels comfortable.
This doesn't feel relatable at all to me. If my writing speed is bottlenecked by thinking about what I'm writing, and my talking speed is significantly faster, that just means I've removed the bottleneck by not thinking about what I'm saying.
It's often better to segregate creative and inhibitive systems even if you need the inhibitive systems to produce a finished work. There's a (probably apocryphal) conversation between George RR Martin and Stephen King that goes something like:
GRRM: How do you write so many books?... Don't you ever spend hours staring at the page, agonizing over which of two words to use, and asking 'am I actually any good at this?'
Alternatively: some people are just better at / more comfortable thinking in auditory mode than visual mode & vice versa.
In principle I don't see why they should have different amounts of thought. That'd be bounded by how much time it takes to produce the message, I think. Typing permits backtracking via editing, but speaking permits 'semantic backtracking' which isn't equivalent but definitely can do similar things. Language is powerful.
And importantly, to backtrack in visual media I tend to need to re-saccade through the text with physical eye motions, whereas with audio my brain just has an internal buffer I know at the speed of thought.
Typed messages might have higher _density_ of thought per token, though how valuable is that really, in LLM contexts? There are diminishing returns on how perfect you can get a prompt.
Also, audio permits a higher bandwidth mode: one can scan and speak at the same time.
That's fair. I sometimes find myself pausing or just talking in circles as I'm deciding what I want. I think when I'm speaking, I feel freer to use less precise/formal descriptions, but the model can still correctly interpret the technical meaning
In either case, different strokes for different folks, and what ultimately matters is whether you get good results. I think the upside is high, so I broadly suggest people try it out
I prefer writing myself, but I could see the appeal of producing a first draft of a prompt by dumping a verbal stream of consciousness into ChatGPT. That might actually be kind of fun to try while going on a walk or something.
I don’t feel restricted by my typing speed, speaking is just so much easier and convenient. The vast majority of my ChatGPT usage is on my phone and that makes s2t a no brainer.
100% this, I built laboratory.love almost entirely with my voice and (now-outdated) Claude models
My go-to prompt finisher, which I have mapped to a hotkey due to frequent use, is "Before writing any code, first analyze the problem and requirements and identify any ambiguities, contradictions, or issues. Ask me to clarify any questions you have, and then we'll proceed to writing the code"
voice transcription is silly when someone is listening you talking to something that isn't exactly human, imagine explaining you were talking to AI. When it's more than one sentence I use voice too.
I use Spokenly with local Parakeet 0.6B v3 model + Cerebras gpt-oss-120b for post-processing (cleaning up transcription errors and fixing technical mondegreens, e.g., `no JS` → `Node.js`). Almost imperceptible transcription and processing delay. Trigger transcription with right ⌥ key.
There are a few apps nowadays for voice transcription. I've used Wispr Flow and Superwhisper, and both seem good. You can map some hotkey (e.g., ctrl + windows) to start recording, then when you press it again to stop, it'll get pasted into whatever text box you have open
Superwhisper offers some AI post-processing of the text (e.g., making nice bullets or grammar), but this doesn't seem necessary and just makes things a bit slower
I use a keyboard shortcut to start and stop recording and it will put the transcription into the clipboard so I can paste into any app.
It's a huge productivity boost - OP is correct about not overthinking trying to be that coherent - the models are very good at knowing what you mean (Opus 4.5 with Claude Code in my case)
I just installed this app and it is very nice. The UX is very clean and whatever I say it transcribes it correctly. In fact I'm transcribing this comment with this app just now.
I am using Whisper Medium. The only problem I see is that at the end of the message it sometimes puts a bye or a thank you which is kind of annoying.
I am all ready to believe that with LLMs it's not worth it trying to be too coherent: I did successfully use LLMs to make sense of what incoherent-sounding people say. (in text)
I'm using Wispr flow, but I've also tried Superwhisper. Both are fine. I have a convenient hotkey to start/end recording with one hand. Having it just need one hand is nice. I'm using this with the Claude Code vscode extension in Cursor. If you go down this route, the Claude Code instance should be moved into a separate window outside your main editor or else it'll flicker a lot
another option is MacWhisper if someone is on macOS and doesn't want to pay for subscription (just one time payment) - pretty much all of those apps these days use paraspeech from NVIDIA which is the fastest and the best open source model that can run on edge devices.
Also haven't tried but on latest MacOS 26 apple updated their STT models so their build in voice dictation maybe is good enough.
It's an AI. You might do better by phrasing it, 'Make a plan, and have questions'. There's nobody there, but if it's specifically directed to 'have questions' you might find they are good questions! Why are you asking, if you figure it'd be better to get questions? Just say to have questions, and it will.
It's like a reasoning model. Don't ask, prompt 'and here is where you come up with apropos questions' and you shall have them, possibly even in a useful way.
> surprised ai companies are not making this workflow possible instead of leaving it upto users to figure out how to get voice text into prompt.
Claude on macOS and iOS have native voice to text transcription. Haven't tried it but since you can access Claude Code from the apps now, I wonder if you use the Claude app's transcription for input into Claude Code.
> Claude on macOS and iOS have native voice to text transcription
Yeah, Claude/ChatGPT/Gemini all offer this, although Gemini's is basically unusable because it will immediately send the message if you stop talking for a few seconds
I imagine you totally could use the app transcript and paste it in, but keeping the friction to an absolute minimum (e.g., just needing to press one hotkey) feels nice
I've spent the last ~4 months figuring out how to make coding agents better, and it's really paid off. The configs at the link above make claude code significantly better, passively. It's a one-shot install, and it may just be able to one-shot your problem, because it does the hard work of 'knowing how to use the agents' for you. Would love to know if you try it out and have any feedback.
We use Claude Code's ability to use skills by defining a bunch of really useful and common skills that are necessary for writing software. For e.g. brainstorming, doing test driven development, or submitting a git commit.
The specific skills you linked are interesting demos of what you can do with skills! But most of them are not useful for the day to day of building software
what really got me moving was dusting off some old text about cognitive styles and team work. Learning to treat agents like a new team-member with extreme tendencies. Learning to observe both my practices and the agents' in order to understand one another's strengths and weaknesses, indicating how we might work better together.
I think this perspective also goes a long way to understanding the very different results different devs get from these tools.
my main approach to quality is to focus agent power on all that code which I do not care about the beauty of: problems with verifiable solutions, experiments, disposable computation. eg my current projects are build/deploy tools, and I need sample projects to build/deploy. I never even reviewed the sample projects' code: so long as they hit the points we are testing.
svelte does not really resonate with me, so I don't know it well, but I suspect there should be good opportunities for TDD in this rewrite. not the project unit tests, just disposable test scripts that guide and constrain new dev work.
you are right to notice that it is not working for you, and at this stage sometimes the correct way to get in sync with the agents is to start again, without previous missteps to poison the workspace. There's good advice in this thread, you might like to experiment with good advice on a clean slate.
my starting point was Google People Management Essentials. I was thinking about team-level politics at work, and noticed some ideas seemed relevant to how teams in orgs can adopt agents. I pursued that idea more widely with other resources and it resonated.
I don't think I have any conclusions to share, just the orientation: to identify and actively accommodate the tool's cognitive style in the same way we do for one another's.
Here’s how I would do this task with cursor, especially if there are more routes.
I would open a chat and refactor the template together with cursor: I would tell it what I want and if I don’t like something, I would help it to understand what I like and why. Do this for one route and when you are ready, ask cursor to write a rules file based on the current chat that includes the examples that you wanted to change and some rationale as to why you wanted it that way.
Then in the next route, you can basically just say refactor and that’s it. Whenever you find something that you don’t like, tell it and remind cursor to also update the rules file.
Solid approach. Don’t be shy about writing long prompts. We call that context engineering. The more you populate that context window with applicable knowledge and what exactly you want, the better the results. Also, having the model code and you talk to the model is helpful because it has the side effect of context engineering. In other words you’re building up relevant context with that conversation history. And be acutely aware of how much context window you’ve used and how much is remaining and when a compaction will happen. Clear context as early as you can per run. Even if it’s 90% remaining.
I see LLMs as searchers with the ability to change the data a little and stay in a valid space. If you think of them like searchers, it becomes automatic to make the search easy (small context, small precise questions), and you won't keep trying again and again if the code isn't working(no data in the training). Also, you will realize that if a language is not well represented in the training data, they may not work well.
The more specific and concise you are, the easier it will be for the searcher. Also, the less modification, the better, because the more you try to move away from the data in the training set, the higher the probability of errors.
I would do it like this:
1. Open the project in Zed
2. Add the Gemini CLI, Qwen code, or Claude to the agent system (use Gemini or Qwen if you want to do it for free, or Claude if you want to pay for it)
3. Ask it to correct a file (if the files are huge, it might be better to split them first)
4. Test if it works
5. If not, try feeding the file and the request to Grok or Gemini 3 Chat
6. If nothing works, do it manually
If instead you want to start something new, one-shot prompting can work pretty well, even for large tasks, if the data is in the training set. Ultimately, I see LLMs as a way to legally copy the code of other coders more than anything else
This is slightly flawed. LLMs are search but the search space is sparse, the size of the question risks underspecification. The question controls the size of the encapsulated volume in that high dimensional space. The only advantage for small prompts is computational cost. In every other way they are a downside.
1. Start with the ‘brainstorm’ session where you explain your feature or the task that you're trying to complete.
2. Allow it to write up a design doc, then an implementation plan - both saved to disk - by asking you multiple clarifying questions. Feel free to use voice transcription for this because it is probably as good as typing, if not better.
3. Open up a new Claude window and then use a git worktree with the Execute Plan command. This will essentially build out in multiple steps, committing after about three tasks. What I like to do is to have it review its work after three tasks as well so that you get easier code review and have a little bit more confidence that it's doing what you want it to do.
Overall, this hasn't really failed me yet and I've been using it now for two weeks and I've used about, I don't know, somewhere in the range of 10 million tokens this week alone.
AI programming, for me, is just a few simple rules:
1. True vibe coding (one-shot, non-trivial, push to master) does not work. Do not try it.
2. Break your task into verifiable chunks. Work with Claude to this end.
3. Put the entire plan into a Markdown file; it should be as concise as possible. You need a summary of the task; individual problems to solve; references to files and symbols in the source code; a work list, separated by verification points. Seriously, less is more.
4. Then, just loop: Start a new session. Ask it to implement the next phase. Read the code, ask for tweaks. Commit when you're happy.
Seriously, that's it. Anything more than that is roleplaying. Anything less is not engineering. Keep a list in the Markdown file of amendments; if it keeps messing the same thing up, add one line to the list.
To hammer home the most important pieces:
- Less is more. LLMs are at their best with a fresh context window. Keep one file. Something between 500 and 750 words (checking a recent one, I have 555 words / 4276 characters). If that's not sufficient, the task is too big.
- Verifiable chunks. It must be verifiable. There is no other way. It could be unit tests; print statements; a tmux session. But it must be verifiable.
What’s more concise than code? From my experience, by the time I’ve gotten an English with code description accurate enough for an agent I could have done it myself. Typing isn’t a hard part.
LLMs/agents have many other uses, but if you’re not offloading your thinking you’re not really going any faster wrt letting them write code via a prompt.
I find it quite interesting; there seems to be a set of AI enthusiasts who heavily offload thinking onto the LLM. There has to be difference in how they function, as I find as soon as I drift into letting the LLM think for me, productivity plummets.
I've had one situation in which I was able to get a 20X productivity boost. I needed to do a large number of similarish things. I carefully hand coded one, created an AGENTS.md that explained everything in a lot of detail and then went to town on generation.
Everything went well and I knew what to expect so reviewing the code was quick.
The experience was super great. I was a 20X AI boosted engineer for a bit. But, I haven't had that situation again.
Anyway, I would say, try to find areas of the code that fit this model if you can. AI is phenomenal for this use case.
First you have to be very specific with what you mean by idiomatic code - what’s idiomatic for you is not idiomatic for an LLM. Personally I would approach it like this:
1) Thoroughly define step-by-step what you deem to be the code convention/style you want to adhere to and steps on how you (it) should approach the task. Do not reference entire files like “produce it like this file”, it’s too broad. The document should include simple small examples of “Good” and “Bad” idiomatic code as you deem it. The smaller the initial step-by-step guide and code conventions the better, context is king with LLMs and you need to give it just enough context to work with but not enough it causes confusion.
2) Feed it to Opus 4.5 in planning mode and ask it to follow up with any questions or gaps and have it produce a final implementation plan.md. Review this, tweak it, remove any fluff and get it down to bare bones.
3) Run the plan.md through a fresh Agentic session and see what the output is like. Where it’s not quite correct add those clarifications and guardrails into the original plan.md and go again with step 3.
What I absolutely would NOT do is ask for fixes or changes if it does not one-shot it after the first go. I would revise plan.md to get it into a state where it gets you 99% of the way there in the first go and just do final cleanup by hand. You will bang your head against the wall attempting to guide it like you would a junior developer (at least for something like this).
With the current generation of model, it really isn't necessary to restart every time you don't like something. Certainly this depends on the model. Most of my recent experience is with Claude Sonnet/Opus and Gpt-5.x.
I very often, when reviewing code, think of better abstractions or enhancements and just continue asking for refactors inline. Very very rarely does the model fall off the rails.
I suppose if your unit of work was very large you might have more issues perhaps? Generally though, large units of work have other issues as well.
Yes I too have found newer models (mostly Opus) to be much better at iterative development. With that being said if I have very strong architectural/developmental steer on what I believe the output should be [mostly for production code where I thoroughly review absolute everything] it’s better to have a documented spec with everything covered rather than trying to clean up via an agent conversation. In the team I’m in we keep all plan.mds for a feature, previously before AI tooling we created/revised these plans in Confluence, so to some degree reworking the plan is more an artefact of the previous process and not necessarily a best practice I don’t think.
Understandable. Certainly my style is not applicable to everyone. I tend to "grow" my software more organically. Usually because the more optimal structure isn't evident until you are actually looking at how all the contracts fit together or what dependencies are needed. So adding a lot of plan/documentation just slows me down.
I tend to create a very high level plan, then code systems, then document the resulting structure if I need documentation.
This works well for very iterative development where I'm changing contracts as I realize the weak point of the current setup.
For example, I was using inheritence for specialized payloads in a pipeline, then realized if I wanted to attach policies/behaviours to them as they flow through the pipeline, I was better off just changing the whole thing to a payload with bag of attached aspects.
Often those designs are not obvious when making the initial architectural plan. So I approach development using AI in much the same way: Generate code, review, think, request revision, repeat.
This really only applies when establishing architecturs though, which is generally the hardest part. Once you have an example, then you can mostly one-shot new instances or minor enhancements.
1. get the LLM to generate a spec from the code (the spec is your new source code). Take your time here, make sure it is correct. Split out implementation details unless they are critical to the business logic.
2. Using the spec, begin crafting an ARCHITECTURE.md -- you put all your non-critical implementation details here. If you need to track requirements, require the LLM to reference the paragraph number(s) of the spec file as it writes the architectural spec. Take your time here as well (this is the second layer of your new source code).
3. Create a high level TODO from the architecture doc.
4. Create a mid-level TODO from the architecture doc (you'll know if this is necessary, perhaps chunk work up by function, feature, or architectural layer).
5. Create a granular level TODO where each task is very tight in scope (write this function, create a translator for this JSON de-serializer to create the app-level model for this object, etc.)
Then let a model go to town.
In the mean-time, you should also require testing. If you have the opportunity, you should have an LLM inspect, spec, and write comprehensive tests for the old code on the external API/interface. You'll be able to use this to test your new implementation to ensure all the corner cases and functionality are covered.
I use AI at work. We have a huge codebase in Golang.
1000s of files.
I had tried cursor, claude code, gemini cli, openai codex and all sorts of vscode based idea (like windsurf, antigravity etc).
All of them get overwhelmed when there is something to implement or change in the codebase primarily due to the amount of code.
But I like aider.
I had better capabilities and is controllable, you can try. And if you use it with latest claude sonnet or gemini 2.5 pro it will be most accurate.
Adding files is a manual process but it has nearly 100% code accuracy.
And it will never change anything without your knowledge.
It is deliberately NOT a fully agentic tool and this really oftentimes is a benefit. With a little bit of manual work you get exactly the files you want in context and prevent the wrong files from being edited (/read-only). Plus, by skipping on all that agentic thinking and tool calling you save on tokens and edit are faster.
You know when Claude Code for Terminal starts scroll-looping and doom-scrolling through the entire conversation in an uninterruptible fashion? Just try reading as much as of it as you can. It strengthens your ability to read code in an instant and keeps you alert. And if people watch you pretend to understand your screen, it makes you look like a mentat.
I wouldn’t recommend that (after having tried it for a while). It is very easy to get the impression that the changes are sound, because on their own they look good. But often when looking at the final result in a git diff tool, the holes and workarounds become way more noticeable.
I take these early reports (less than a week or two after a major model release) with a grain of salt. It takes time to get to know a model, and maybe there's some selection bias in who's posting within 1-2 days of getting access.
(Although in this particular case, the very different knowledge cutoff makes it a lot easier to believe)
For me what vastly improved the usefulness when working with big json responses was to install jq in my system and tell the llm to use jq to explore the json, instead of just trying to ingest it all together. For other things I explicitly ask it to write a script to achieve something instead of doing it directly.
That makes so much sense, it would make a great MCP. Maybe something similar for DOM manipulation; extracting text out of big, noisy HTML pages using a combination of Find Text with selector return values, and a DSL for picking and filtering DOM trees.
I have never once said "Go build feature x" and let it run off. Not saying you do, but I feel like this is how a lot of people interact with these tools. I have a very conversational style of building with these tools, and I'm very blunt with them when I think they're wrong, since I'm fairly experienced and I can smell when something is seemingly wrong with the model's thinking.
I typically have a discussion about how I want the architecture to be and my exact desired end state. I make the model repeat back to me what I want and have it produce the plan to the degree I am happy with. I typically do not have it work in building large amorphous systems, I work with and have it plan subsystems of the overall system I'm building.
A lot of my discussion with the model is tradeoffs on the structure I'm imagining and methods it might know. My favorite sentence to send Claude right now "Is go google this." because I almost never take its first suggested response at face value.
I also watch every change and cancel and redirect ones I do not like. I read code very fast and like the oversight, because even small stupidities stack up.
The workflow is highly iterative and I make changes frequently, my non AI workflow was like this too. Write, compile, test, tweak and repeat.
I like this workflow a lot because I feel I am able to express my designs succinctly and get to a place I'm happy with with much less writing than a lot of the actual code itself which in many cases is not an interesting problem, but work that needs to happen for a working system at all.
I do wind up taking over, but feel less than I used to, in edges where its clear there is not a lot of training data or I'm working on something fairly novel or lower level.
I work in Python, Rust and Typescript (Rust by far most often) and the majority of my work is technically challenging but at the systems design level maybe not low level systems programming challenging. Think high concurrency systems and data processing, training models, and some web dev.
To add to this, I find talking to it about code quality or architecture issues can work quite well. Just treating it like another developer. Saying, “I’m not happy with the way the project is going because of X, and Y” and then making a plan for how to get things back on track. Maybe putting a complete rewrite on the table, or maybe just having it record the agreed code style principles in CLAUDE.md, etc
How did you learn how to use AI for coding? I'm open to the idea that a lot of "software carpentry" tasks (moving/renaming files, basic data analysis, etc) can be done with AI to free up time for higher level analysis, but I have no idea where to begin -- my focus many years ago was privacy, so I lean towards doing everything locally or hosted on a server I control so I lack a lot of knowledge of "the cloud" my HN betheren have.
IMO, I found those specific example tasks to be better handled by my IDE's refactoring features, though support for that is going to vary by project/language/IDE. I'm still more of a ludite when it comes to LLM based development tools, but the best case I've seen thus far is small first bites out of a big task. Working on an older no-tests code base recently, it's been things like setting up 4-5 tests that I'll expand on into a full test suite. You can't take more than a few "big" bites out of a task before you have 0 context as to what direction the vector soup sloshed in.
So, in terms of carpentry, I don't want an LLM framer who's work I need to build off of, but an LLM millworker handing me the lumber is pretty useful.
Funny usually a lot of my code is software plumbing, and gardening.
In terms of ai assisted programming.
I microanage my ai. Give it specific instructions with single steps.
Don't really let it build ehoe files by itself as it usually makes a mess of things, bit it's useful when doing predictable changes and marginally faster than doing it manually.
Yeah I can totally see that working well! I think the main thing is taking small, specific steps that keep you in the loop, and less so about the actual act of typing the specific bytes that are fed into the compiler, though I guess I still find that more efficient for myself than trying to describe what I want ~90% of the time.
Think of some coding heavy project you always wanted to do but haven't had time for.
Open up cursor-agent to make the repo scaffolding in an empty dir. (build system, test harness, etc. )
Open up cursor or Claude code or whatever and just go nuts with it. Remember to follow software engineering best practices (one good change with tests per commit)
Get very good at context management (updating AGENTS.md, starting new session, etc).
Embrace TDD. It might have been annoying when Extreme Programming came out 25 years ago, but now that agents can type a lot faster than us, it's an awesome tool for putting guardrails around the agent.
(I teach workshops on best practices for agentic coding)
For this particular project I suggest manually prying one section of the app, committing that change, and then telling Claude "look at commit HASH first, now port feature X in the same style".
Consider giving Cursor a try. I personally like the entire UI/UX, their agent has good context, and the entire experience overall is just great. The team has done a phenomenal job. Your workflow could look something like this:
1. Prompt the agent
2. The agent gets too work
3. Review the changes
4. Repeat
This can speed up your process significantly, and the UI clearly shows the changes + some other cool features
EDIT: from reading your post again, I think you could benefit primarily from a clear UI with the adjusted code, which Cursor does very well.
Cursor makes it easier to watch what the model is doing and to also make edits at the same time. I find it useful at work where I need to be able to justify every change in a code review. It’s also great for getting a feel for what the models are capable of - like, using Cursor for a few months make it easier to use Claude Code effectively
HEAR, HEAR. You’ve just described how modern SWE truly works.
You’re ahead of your time — of the same spirit as
Martin Luther or George Washington. Fear not, brave soldier; carry on the message. Downvotes will come, but take heart: the truth must be spoken.
The days of copying and pasting from Stack Overflow will not be forgotten — they will be honored by our laid off forefathers.
before getting into any implementation, i'd get claude to read and document the starting code, and propose its own idiomatic way to rewrite it to svelte. this is a good use for plan mode, and also a spot where you could walk through with claude to put documentation examples of what you consider good and bad, so it can monkey-see, monkey do.
the other thing that makes it go brrrr is to add lots of feedback loops. unit tests, e2e tests, linters, etc. make sure it can pass everything before it shows you anything.
my overall process would be to
1. go through plan mode for documentation and test writing
2. have claude lay out the plan into steps
3. project setup for builds/feedback loops, deploys, etc
4. for each step in that plan, run back through plan mode to clear up any confusions for the component (also record those in docs) and then let it rip on implementation until its ready for a commit.
claude might take a long time writing the code between qna sessions, but it can all be async so the 15-20min doesnt matter much
There are a number of ways to get examples into the LLM.
I use shadcn-svelte and bitsui and try to copy the examples (copy button at the top of the docs) or tell the LLM to fetch docs from the github repo or use context7's MCP for docs.
Try specification-driven-development with something like speckit [0]. It helps tremendously for facilitating a process around gathering requirements, doing research, planning, breaking into tasks, and finally implementing. Much better than having a coding agent just go straight to coding.
Go into planning mode and plan the overall refactor. Try to break the tasks down into things that you think will fit into a single context window.
For mid sized tasks and up, architecture absolutely has to be done up front in planning mode. You can ask it questions like "what are some alternatives?", "which approach is better?".
If it's producing spaghetti code, can you explain exactly what it's doing wrong? If you have an idea of what ideal solution should look like, it's not too difficult to guide the LLM to it.
In your prompt files, include bad and good examples. I have prompt files for API/interface design, comment writing, testing, etc. Some topics I split into multiple files like criteria for testing, testing conventions.
I've found the prompts where they go "you are a X engineer specializing in Y" don't really do much. You have to break things down into concrete instructions.
Claude has been miserable for anything Java related, in my experience. Use it maybe as a cross check for ChatGPT, which is far superior. They both make mistakes, but Claude repeatedly changes course, contradicts itself, or makes suggestions that are basically unusable. I don't understand why conversations here are always focusing on a bad LLM.
I break everything down into very small tasks. Always ask it to plan how it will do it. Make sure to review the plan and spot mistakes. Then only ask it to do one step at a time so you can control the whole process. This workflow works well enough as long as you're not trying to do anything too interesting. Anything which is even a little bit unique it fails to do very well.
sounds like you're doing all the actual work. why not just type the code as you figure out how to break down the problem? you're going to have to review the output anyway.
It's useful to have the small functions all written.
I program mostly in VBA these days (a little problematic as is a dead leanguage since 2006 and even then it was niche) and I have never recived a correct high level ""main"" sub but the AIs are pretty good at doing small subs I then organize.
And yes, telling me where I make errors, they are pretty good at that
At the end of the day I want reliability and there is no way I can't do what without full review.
The funny thing is that they try to use the """best practices""" of coding where you would reasonably want to NOT have them.
Go slowly. Shoot for a 10% efficiency improvement, not 10x. Go through things as thoroughly as if writing by hand, and don't sacrifice quality for speed. Be aware of when it's confidently taking you down a convoluted path and confidently making up reasons to do so. Always have your skeptic hat on. If something seems off, it probably is. When in doubt, exit the session and start over.
I still find chat interface generally more useful than coding assistant. It allows you to think and discuss higher level about architecture and ideas before jumping into implementation. The feedback loop is way faster because it is higher level and it doesn't have to run through your source tree to answer a question. You can have a high ROI discussion of ideas, architecture,algorithms, and code, before committing to anything. I still do most of my work copying and pasting from the chat interface.
Agents are nice when you have a very specific idea in mind, but I'm not yet hugely fond of them otherwise. IME the feedback loop is too long, they often do things badly, and they are overly confident in their oytput, encouraging cursory reviews and commits of hacked-together work. Sometimes I'll give it an ambitious task just in the off chance that it'll succeed, but with the understanding that if it doesn't get it right the first time, I'll either throw it away completely, or just keep whatever pieces it got right and pitch the rest; it almost never gets it right the second time if it's already started on an ugly approach.
But the main thing is to start small. Beyond one-shotting prototypes, don't expect it to change everything overnight. Focus on the little improvements, don't skip design, and don't sacrifice quality! Over time, these things will add up, and the tools will get better too. A 10% improvement every month gets to be a 10x improvement in (math...). And you'll be a lot better positioned than those who tried to jump onto the 10x train too fast because you'll not have skipped any steps.
> A 10% improvement every month gets to be a 10x improvement in (math...)
1.1^24=9.85, so yeah, if you could reliably get a 10% speed-up each month, you’d get to 10x in roughly 2 years. (But I’d expect the speed-up per month to be non-linear.)
I use Claude. It's really good, but you should try to use it as Boris suggests. The other thing I do is give it very careful and precisely worded specs for what you want it to do. I have the habit, born from long experience, of never assuming that junior programmers will know what you want the program to do unless you make it explicit. Claude is the same. LLM code generators are terrific, but they can't second guess unclear communication.
Using carefully written specs, I've found Claude will produce flawless code for quite complex problems. It's magic.
The approach I’ve been taking lately with general AI development:
1. Define the work.
2. When working in a legacy code base provide good examples of where we want to go with the migration and the expectation of the outcome.
3. Tell it about what support tools you have, lint, build, tests, etc.
4. Select a very specific scenario to modify first and have it write tests for the scenario.
5. Manually read and tweak the tests, ensure they’re testing what you want, and they cover all you require. The tests help guardrail the actual code changes.
6. Depending upon how full the context is, I may create a new chat and then pull in the test, the defined work, and any related files and ask it to implement based upon the data provided.
This general approach has worked well for most situations so far. I’m positive it could be improved so any suggestions are welcome.
Lots of good suggestions. However for Svelte in particular I’ve had a lot of trouble. You can get good results as long as you don’t care about runes and Svelte 5. It’s too new, and there’s too much good Svelte code out there used in training that doesn’t use Svelte 5. If you want AI generated Svelte code, restricting yourself to <5 is going to improve your results.
(YMMV: this was my experience as of three or four months ago)
The key insight most people miss: AI isn't a code generator, it's a thinking partner. Start by defining the problem precisely in plain English before asking it to code. Use it for refactoring and explaining existing code rather than generating from scratch. That's where you get the 10x gains.
Also, treat bad AI suggestions as learning opportunities - understand why the code is wrong and what it misunderstood about your requirements.
Start with a problem. I'm building https://helppet.ai, a voice agent for Veterinarians. I didn't know anything about AI programming other than absolute fundamentals I learned in 2017 through Stanford AI course - this was just theory and a lot has changed. I followed startups doing solving similar problems, and I asked detailed questions to everyone I could. I went to AI hack events to learn techniques others are using. Eventually I ended up with something pretty great and had fun doing so. So start with a problem and then work backwards.
A largely undiscussed part of AI use in code is that it's actually neither easy nor intuitive to learn max effectiveness of your AI output.
I think there's a lot of value in using AIs that are dumb to learn what they fail at. The methods I learned using gpt3.5 for daily work still transaltes over to the most modern of AI work. It's easy to understand what makes AI fail on a function or two than understanding that across entire projects.
My main tips:
1. More input == lower quality
Simply put, the more you can focus your input data to output results the higher quality you will get.
For example on very difficult problems I will not only remove all comments but I will also remove all unrelated code and manually insert it for maximum focus.
Another way to describe this is compute over problem space. You are capped in compute so you must control your problem space.
2. AI output is a reflection of input tokens and therefore yourself.
If you don't know what you're doing in a project or are mentally "lazy" AI will fail with death by a thousand cuts. The absolute best use of AI is knowing EXACTLY what you want and describing it in as few words as possible. I directly notice if I feel lazy or tired in a day and rely heavily on the model I will often have to revert entire days of work due to terrible design.
3. Every bad step of results from an AI or your own design compound problems as you continue.
It's very difficult to know the limits of current AI methods. You should not be afraid of reverting and removing large amounts of work. If you find it failing heavily repeatedly this is a good sign your design is bad or asking too much from it. Continuing on that path reduces quality. You could end up in the circular debugging loops with every fix or update adds even more problems. It's far better practice to drop the entire feature of updates and restart with smaller step by step actions.
4. Trust AI output like you would stack overflow response or a medium article.
Maybe its output would work in some way but it has a good chance of not working for you. Repeatedly asking same questions differently or different angles is very helpful. The same way debugging via stack overflow was trying multiple suggestions to discover the best real problem.
I’ve been doing a rewrite of some file import type stuff, using a new common data model for storage, and I’ve taken to basically pasting in the old code, commented out and telling it to fill the new object using the commented out content as a guide. This probably got me 80% of the way? Not perfect, but I don’t think anything really is.
I find all AI code to be lower quality than humans who care about quality.
This might be ok, I think the assumpt with AI is that we don't need to look at code so that it looks beautiful because AI will look at it .
Opus 4.5 is the highest quality code I've seen out of LLMs, still some way to go to match programmers who care, but much better than most people. I find it enough to let it write the code and then manually polish it afterwards.
Same. It is finally almost always more productive for me to use vs doing it myself. What this means for my career and life, I don’t know. But, I do think the job for most of us is going to look very different moving forward.
My experience with generating code with AI is very limited across a limited set of programming languages but whenever it has produced low quality code, it has been able to better itself with further instructions. Like "oh no, that is not the right naming convention. Please use instead" or "the choice of design pattern here is not great because ${reasons}. Produce 2 alternative solutions using x or y" and in nearly every case it produces satisfactory results.
Kinda, yes, my experience has also been that it takes too long in that way though. I've been using AI for different tasks than something that requires high quality code
I am probably going to get downvoted to oblivion for this but if you’re going to have AI write your code, you’ll get the most mileage out of letting it do its thing and building tests to make sure everything works. Don’t look at the code it generates - it’s gonna be ugly. Your job is to make sure it does what it’s supposed to. If there’s a bug, tell it what’s wrong and to fix the bug. Let it wade through its own crap - that’s not your tech debt. This is a new paradigm. No one is going to be writing code anymore, just almost like no one is checking the assembly output of a compiler anymore.
This is just my experience. I’ve come to the conclusion that if I try to get AI to write code that works and is elegant, or if I’m working inside the same codebase that AI is adding cruft to, I don’t get much of a speed up. Only when I avoid opening up a file of code myself and let AI do its thing do I get the 10x speed up.
What is the time of the longest-lived actively developed and deployed codebase where this approach has been successful so far and your co-maintainers aren't screaming bloody murder?
The hack for sveltekit specifically, is to first have Claude translate the existing code into a next.js route with react components. Run it, debug and tweak it. Then have Claude translate the next.js and react components into sveltekit/svelte. Try and keep it in a single file for as long as possible and only split it out once it's working.
I've had very good results with Claude Code using this workflow.
Its super frustrating there is no official guide. I hear lots of suggestions all the time and who knows if they help or not. The best one recently is tell the LLM to "act like a senior dev", surely that is expected by default? Crazy times.
When the world is complicated, entangled, and rapidly changing, would you expect there to be one centralized official guide?*
At the risk of sounding glib or paternalistic -- but I'm going to say it anyway, because once you "see it" it won't feel like a foreign idea being imposed on you -- there are ways that help to lower and even drop expectations.
How? To mention just one: good reading. Read "Be a new homunculus" [1]. To summarize, visualize yourself like you are the "thing that lives in your brain". Yes, this is non-sense but try it anyway.
If you find various ways to accept "the world is changing faster than ever before" and it feels like too much. Maybe you are pissed off or anxious about AI. Maybe AI is being "heavily encouraged" for you (on you?) at work. Maybe you feel like we're living in an unsustainable state of affairs -- don't deny it. Dig into that feeling, talk about it. See where it leads you. Burying these things isn't a viable long-term strategy.**
* There is an "awesome-*" GitHub repository for collecting recommended resources to help with Claude Code: [2] But still requires a lot of curation and end-user experimentation: [2] There are few easy answers in a dynamic uncertain world.
** Yes I'm intentionally cracking the door open to "Job loss is scary. It is time to get real on this, including political activism."
I get that. I probably could have been much more succinct by saying this: We can consciously act in ways that reduce the frustration level even if the environment itself doesn't change. It usually takes time and patience, but not always. Sometimes a particular mindset shift is sufficient to make a frustration completely vanish almost immediately.
Some examples from my experience: (1) Many particular frustrations with LLMs vanish the more I learn about their internals. (2) Frustration with the cacophony of various RAG/graph-database tooling vanishes once I realize that there is an entire slice of VC money chasing these problems precisely because it is uncertain: the victors are not pre-ordained and ... [insert bad joke about vectors here]
I find Claude Code works best when given a highly specific and scoped tasks. Even then sometimes you'll need to course correct it once you notice its going off course.
Basically a good multiplier, and an assistant for mudane task, but not a replacement. Still requires the user to have good understanding about the codebase.
Writing summary changes for commit logs is amazing however, if you're required to.
I think you shouldn't think so much about it, the more you use it, the better you will understand how it can help you. The most gain will be coming from the models jumping and how you get updated using the best for your use case.
I learned the hard way, when Claude has 2 conflicting information in Claude.md it tends to ignore both. So, precise language is key, don't use terms like 'object', which may have different meanings in different fields.
I like to followup with "Does this make sense?" or similar. This gets it to restate the problem in its own words, which not only shows you what its understanding of the problem is, it also seems to help reinforce the prompt.
Would love to hear any feedback using Google's anitgravity from a clean slate. Holiday shutdown is about to start at my job and I want to tinker with something that I have not even started.
Honestly if your boss does not force you to use AI, don't.
Don't feel like you might get "left behind". LLM assisted development is still changing rapidly. What was best practice 6 months ago is irrelevant today. By being an early adopter you will just learn useless workarounds that might soon not be necessary to know.
On the other hand if you keep coding "by hand" will keep your skills sharp. You will protect yourself against the negative mental effects of using LLMs like skill decline, general decline of mental capacity, danger of developing psychosis because of the sycophantic nature of LLMs and so on.
LLM based coding tools are only getting easier to use and if you actually know how to code and know software architecture you will able to easily integrate LLM based workflows and deliver far superior results compared to someone who spend their years vibe coding, even if you picked up Claude Code or whatever just a month ago. No need for FOMO,
Right. Be the person on your team who just fucking doesn't because you'll learn your problem domain while everyone else is doing unpaid tool testing work for AI companies.
One day these things will actually do what they are supposed to do with a measure of consistency that doesn't involve GRIMOIRE.md or whatever and you can use them then. And most of the early mover advantage will be gone, because LLMs will not be the winning technology.
In the meantime be the person who learned the lessons of social media: popular isn't the same as good, appropriate or sensible.
Automated code checks. Either custom linter rules (like ESLint) or prebuild scripts to enforce whatever architectural or style rules you want, basically all of the stuff that you'd normally flag in code review that can be codified into an automatic check but hasn't been before due to developers either not finding it worth their time to do it, or not having enough time or skill to do that - use the AI to write as many of these as needed, just like:
node prebuild/prebuild.cjs
which will then run all the other checks you've defined like:
and so on. You might have tens of these over the years of working on a project, plus you can write them for most things that you'd conceivably want in "good code". Examples above are closer to a Vue codebase but the same principles apply to most other types of projects out there - many of those would already be served by something like ESLint (you probably want the recommended preset for whatever ruleset exists for the stack you work with), some you'll definitely want to write yourself. And that is useful regardless of whether you even use AI or not, so that by the time code is seen by the person doing the review, hopefully all of those checks already pass.
If "good code" is far too nebulous of a term to codify like that, then you have a way different and frankly more complex problem on your hands. If there is stuff that the AI constantly gets wrong, you can use CLAUDE.md as suggested elsewhere or even better - add prebuild script rules specifically for it.
Also, a tech stack with typing helps a bunch - making wrong code harder to even compile/deploy. Like, with TypeScript you get npm run type-check (tsc) and that's frankly lovely to be able to do, before you even start thinking about test coverage. Ofc you still should have tests that check the functionality of what you've made too, as usual.
I want to say a lot of mean things, because an extremely shitty, useless, clearly Claude-generated test suite passed the team PR review this week, tests were useless, so useless the code they were linked to (can't say if the code itself was Ai-written though) had a race condition, that, if triggered and used correctly, could probably rewrite the last entry of any of the firewall we manage (DENY ALL is the one I'm afraid about).
But I can't even shit on Claude AI, because I used it to rewrite part of the tests, and analyse the solution to fix the race condition (and how to test it).
It's a good tool, but in the last few weeks I've been more and more mad about it.
Anyway. I use it to generate a shell. No logic inside, just data models, and functions prototypes. That help with my inability to start something new. Then I use it to write easy functions. Helpers I know I'll need. Then I try to tie everything together. I never hesitate to stop Claude and write specific stuff myself, add a new prototype/function, or delete code. I restart the context often (Opus is less bad about it, but still). Then I ask it about easy refactoring or library that would simplify the code. Ask for multiple solutions each time.
For your task, instead of a direct translation, try adding a "distillation" step in between. Have it take the raw format and distill the important parts to yaml or whatever, then take the distillation and translate that into the new format. That way you can muck with the yaml by hand before translating it back, which should make it easier to keep the intent without the spaghetti getting in the way. Then you can hand-wire any "complexities" into the resulting new code by hand, avoiding the slop it would more likely create.
It may even be worth having it write a parser/evaluator that does these steps in a deterministic fashion. Probably won't work, but maybe worth a shot. So long as it does each translation as a separate step, maybe at least one of them will end up working well enough, and that'll be a huge time saver for that particular task.
first off, drop the idea of coding "agents" entirely. semi-async death valley is not worth it, you will never get into the flow state with an "agent" that takes less than an hour to spin, and we did not learn how to make true async agents that run for this long while maintaining coherence yet. OpenAI is the closest in that regard, but they are still at a 20-minute mark, so I am not dropping the quotes for now.
another argument against letting LLM do the bulk of the job is that they output code that's already legacy, and you want to avoid tech debt. for example, Gemini still thinks that Kotlin 2.2 is not out, hence misses out on context parameters and latest Swift interoperability goodies. you, a human being, are the only one who will ever have the privilege of learning "at test time", without separate training process.
replace coding "agents" with search tools. they are still non-deterministic, but hey, both Perplexity and Google AI Mode are good at quick lookup of SvelteKit idioms and whatnot. plus, good old Lighthouse can point out a11y issues - most of them stem from non-semantic HTML. but if you really want to do it without leaving a terminal, I can recommend Gemini CLI with some search-specific prompting. it's the only CLI "agent" that has access to the web search to my knowledge. it's slower than Perplexity or even ChatGPT Search, but you can attach anything as a context.
this is the true skill of "how to use AI" - only use it where it's worth it. and let's be real, if Google Search was not filled with SEO crap, we would not need LLMs.
I've been heavily vibe coding for a couple of personal projects. A free kids typing game and bringing back a multiplayer game I played a lot as a kid back to life both with pretty good success.
Things I personally find work well.
1. Chat through with the AI first the feature you want to build. In codex using vscode I always switch to chat mode, talk through what I am trying to achieve and then once myself and the AI are in "agreement" switch to agent mode. Google's antigravity sort of does this by default and I think it's probably the correct paradigm to use.
2. Get the basics right first. It's easy for the AI to produce a load of slop, but using my experience of development I feel I am (sort of) able to guide the AI in advance in a similar way to how I would coach junior developers.
3. Get the AI to write tests first. BDD seems to work really well for AI. The multiplayer game I was building seemed to regress frequently with just unit tests alone, but when I threw cucumber into the mix things suddenly got a lot more stable.
4. Practice, the more I use AI the more I believe prompting is a skill in itself. It takes time to learn how to get the best out of an Agent.
What I love about AI is the time it gives me to create these things. I'd never been able to do this before and I find it very rewarding seeing my "work" being used by my kids and fellow nostalgia driven gamers.
> 4. Practice, the more I use AI the more I believe prompting is a skill in itself. It takes time to learn how to get the best out of an Agent.
This would have been my tip, as well.
Talk to others who are good with these tools to learn from what they're doing and read blogs/docs/HN for ideas, but most importantly, make time for yourself on a daily/weekly/monthly/whatever basis to practice with the tool.
It's taken me about a year of consistent practice to feel comfortable with LLM coding. It just takes time, like learning any other technology.
I will be crucified by this, but I think you are doing it wrong.
I would split it in 2 steps.
First, just move it to svelte, maintain the same functionality and ideally wrap it into some tests. As mentioned you want something that can be used as pass/no-pass filter. As in yes, the code did not change the functionality.
Then, apply another pass from Svelte bad quality to Svelte good quality.
Here the trick is that "good quality" is quite different and subjective. I found the models not quite able to grasp what "good quality" means in a codebase.
For the second pass, ideally you would feed an example of good modules in your codebase to follow and a description of what you think it is important.
Ask people to do things for you. Then you will learn how to work with something/someone who has faults but can overall be useful if you know how to view the interaction.
Though remember that it's not a human. It's easy to waste a lot of time convincing it to do something in a certain way, then one prompt later it forgets everything you said and reverts back to its previous behavior. (Yes humans can do that too, but not usually to this level).
It's important (though often surprisingly hard!) to remember it's just a tool, so if it's not doing things the way you want, start over with something else. Don't spend too much time on a lost cause.
This isn't exactly an answer to your question but I've experienced some efficiency gains in using AI agents for pre-reviewing my PRs and getting it to create tests.
You still get to maintain the core code and maintain understandability but it helps with the tasks the take time that aren't super interesting.
There are very real limitations on AI coders in their current state. They simply do not produce great code most of the time. I have to review every line that it generates.
AI is great at pattern matching. Set up project instructions that give several examples of old code, new code and detailed explanations of choices made. Also add a negative prompt, a list of things you do not want AI to do based on past frustrations.
Voice prompts, restate what you want, how you want it from multiple vantage points. Each one is a light cone in a high dimensional space, your answer lies in their intersection.
Use mind altering drugs. Give yourself arbitrary artificial constraints.
Try using it in as many different ridiculous ways you can. I am getting the feeling you are only trying one method.
> I've had a fairly steady process for doing this: look at each route defined in Django, build out my `+page.server.ts`, and then split each major section of the page into a Svelte component with a matching Storybook story. It takes a lot of time to do this, since I have to ensure I'm not just copying the template but rather recreating it in a more idiomatic style.
Relinquish control.
Also, if you have very particular ways of doing things, give it samples of before and after (your fixed output) and why. You can use multishot prompting to train it to get the output you want. Have it machine check the generated output.
> Simple prompting just isn't able to get AI's code quality within 90%
Would simple instructions to a person work? Esp a person trained on everything in the universe? LLMs are clay, you have to mold them into something useful before you can use them.
In addition to what the sibling commenters are saying: Set up guardrails for what you expect in your project's documentation. What is the agent allowed to do when writing unit tests vs say functional tests, what packages it should never use, coding and style templates etc.
1. Introduce it to the code base (tell it: we're going to work on this project, project does X is written in language Y). Ask it to look at the project to familiarize.
2. Tell it you want to refactor the code to achieve goal Z. Tell it to take a look and tell you how it will approach this. Consider showing it one example refactor you've already done (before and after).
3. Ask it to refactor one thing (only) and let you look at what it did.
4. Course correct if it didn't do the right thing.
> prompting just isn't able to get AI's code quality within 90% of what I'd write by hand
Tale as old as time. The expert gets promoted to manager, and the replacement worker can’t deliver even 90% of what the manager used to. Often more like 30% at first, because even if they’re good, they lack years of context.
AI doesn’t change that. You still have to figure out how to get 5 workers who can do 30-70% of what you can do, to get more than 100% of your output.
There are two paths:
1. Externalized speed: be a great manager, accept a surface level understanding, delegate aggressively, optimize for output
2. Internalized speed: be a great individual contributor, build a deep, precise mental model, build correct guardrails and convention (because you understand the problem) and protect those boundaries ruthlessly, optimize for future change, move fast because there are fewer surprises
Only 1 is well suited for agent-like AI building. If 2 is you, you’re probably better off chatting to understand and build it yourself (mostly).
At least early on. Later, if you nail 2 and have a strong convention for AI to follow, I suspect you may be able to go faster. But it’s like building the railroad tracks before other people can use them to transport more efficiently.
Django itself is a great example of building a good convention. It’s just Python but it’s a set of rules everyone can follow. Even then, path 2 looks more like you building out the skeleton and scaffolding. You define how you structure Django apps in the project, how you handle cross-app concerns, like are you going to allow cross-app foreign keys in your models? Are you going to use newer features like generated fields (that tend to cause more obscure error messages in my experience)?
Here’s how I think of it. If I’m building a Django project, the settings.py file is going to be a clean masterpiece. There are specific reasons I’m going to put things in the same app, or separate apps. As soon as someone submits a PR that craps all over the convention I’ve laid out, I’m rejecting aggressively. If we’ve built the railroad tracks, and the next person decides the next set of tracks can use balsa wood for the railroad ties, you can’t accept that.
But generally people let their agent make whatever change it makes and then wonder why trains are flying off the tracks.
> But generally people let their agent make whatever change it makes and then wonder why trains are flying off the tracks.
IMO, this is the biggest issue. Well, along with just straight up ignoring what you tell it and doing whatever it thinks should be done.
But, to answer the actual thread question: Make it work (all the tests pass) then make it right is the way I'm getting quality work out of the robots. As long as you watch them to make sure they don't either change the tests to pass on buggy code or change the code to pass on buggy tests (yes, Claude is quite proficient and eager to do both) then the code gets better and better as new stuff is added and the 'flow of computation' is worked out.
Oh, and have an actual plan to follow so they don't get distracted at the first issue and say they're finished because they fixed some random unrelated bug. I've also found it helpful to have them draft up such a plan while they're knee deep in that section of the code for related work so they don't have to figure it all out again from scratch and try to add a few extra levels of abstraction just because.
> This kind of work seems like a great use case for AI assisted programming
Always check your assumptions!
You might be thinking of it as a good task because it seems like some kind of translation of words from one language to another, and that's one of the classes of language transformations that LLM's can do a better job at than any prior automated tool.
And when we're talking about an LLM translating the gist of some English prose to French, for a human to critically interpret in an informal setting (i.e not something like diplomacy or law or poetry), it can work pretty well. LLM's introduce errors when doing this kind of thing, but the broader context of how the target prose is being used is very forgiving to those kinds of errors. The human reader can generally discount what doesn't make sense, redundancy across statements of the prose can reduce ambiguity or give insight to intent, the reader may be able to interactively probe for clarifications or validations, the stakes are intentionally low, etc
And for some kinds of code-to-code transforms, code-focused LLM's can make this work okay too. But here, you need a broader context that's either very forgiving (like the prose translation) or that's automatically verifiable, so that the LLM can work its way to the right transform through iteration.
But the transform you're trying to do doesn't easily satisfy either of those contexts. You have very strict structural, layout, and design expectations that you want to replicate in the later work and even small "mistranslations" will be visually or sometimes even functionally intolerable. And without something like a graphic or DOM snapshot to verify the output with, you can't aim for the iterative approach very effectively.
TLDR; what you're trying to do is not inherently a great use case. It's actually a poor one that can maybe be made workable through expert handling of the tool. That's why you've been finding it difficult and unnatural.
If your ultimate goal is to improve your expertise with LLM's so that you can apply them to challenging use cases like this, then it's a good learning opportunity for you and a lot of the advice in other comments is great. The most key factor being to have some kind of test goal that the tool can use for verify its work until it strikes gold.
On the other hand, if your ultimate goal is to just get your rewrite done efficiently and its not an enormous volume of code, you probably just want to do it yourself or find one of our many now-underemployed humans to help you. Without expertise that you don't yet have, and some non-trivial overhead of preparatory labor (for making verification targets), the tool is not well-suited to the work.
Hey, I am bgwalter from the anti-AI industrial complex, which is a $10 trillion industry with a strong lobby in DC.
I would advise you to use Natural Intelligence, which will be in higher demand after the bubble has burst completely (first steps were achieved by Oracle this week).
This is just meaningless knee-jerking, try making an actual argument. At least the GP is arguing that more use of AI leads to loss of personal coding skills. It's unclear at this point what level AI will grow to, i.e. it could hit a hard wall at 70% of a good programmer's ability, and in that case you would really want those personal coding skills since they'll be worth a lot. It could also far exceed a good programmer, in which case the logic reverses and you want those AI handling skills…
NB: I'm talking about skill cap here, not speed of execution. Of course, an AI will be faster than a programmer… *if* it can handle the job, and *if* you can trust it enough to not need even more time in review…
Unfortunately, I can no longer do long division. No one will pay me to do long division and I have a calculator now. I could stay sharp at long division for a hobby though. Keep those for loops sharp if you want, but I don't see people paying you to hand code. Eventually, it will just be a liability. (like not using a calculator).
"it could hit a hard wall at 70% of a good programmer's ability"
That is not what NVDA,AMZN,GOOG,or MSFT believe. Maybe you are right and they are all wrong. They do have some smart people on staff. But, betting against the sp50 is generally a terrible plan.
> Keep those for loops sharp if you want, but I don't see people paying you to hand code.
Well, personally speaking, I'm paid to hand code; LLMs have not reached the quality of my code output yet and I'm seeing no pressure at all to use LLMs.
Relatedly, I work on an open source project where the constraining resource is review (as it is in most open source projects.) The current state is that LLM generated code is incredibly hard and annoying to review and there is a lot of pushback.
So, I'm going to wait and see.
(...especially since there's also legal challenges to LLMs trained on open source code with no regard to its licenses.)
There have been lots of tools that have made programming more efficient. Probably most programmers have used some of those tools, but very few have used every tool. Why do you suppose that LLMs in particular must be used?
LLMs aren't calculators; for example, your calculator always gives you the same outputs given the same inputs.
Long division is a pretty simple algorithm that you can easily and quickly relearn if needed even your LLM of choice can likely explain that to you given there's plenty of writing about it in books and on the internet.
Have we really reached the point where a candidate gets outright rejected for not using AI tools, without taking personal aptitudes into consideration?
Everyone's suggestions feel designed to frustrate me. Instructions on how to cajole and plead that seem more astrology than engineering.
This is the pattern I settled on about a year ago. I use it as a rubber-duck / conversation partner for bigger picture issues. I'll run my code through it as a sanity "pre-check" before a pr review. And I mapped autocomplete to ctrl-; in vim so I only bring it up when I need it.
Otherwise, I write everything myself. AI written code never felt safe. It adds velocity but velocity early on always steals speed from the future. That's been the case for languages, for frameworks, for libraries, it's no different for AI.
In other words, you get better at using AI for programming by recognizing where its strengths lie and going all in on those strengths. Don't twist up in knots trying to get it to do decently what you can already do well yourself.
Hey, Boris from the Claude Code team here. A few tips:
1. If there is anything Claude tends to repeatedly get wrong, not understand, or spend lots of tokens on, put it in your CLAUDE.md. Claude automatically reads this file and it’s a great way to avoid repeating yourself. I add to my team’s CLAUDE.md multiple times a week.
2. Use Plan mode (press shift-tab 2x). Go back and forth with Claude until you like the plan before you let Claude execute. This easily 2-3x’s results for harder tasks.
3. Give the model a way to check its work. For svelte, consider using the Puppeteer MCP server and tell Claude to check its work in the browser. This is another 2-3x.
4. Use Opus 4.5. It’s a step change from Sonnet 4.5 and earlier models.
Hope that helps!
> If there is anything Claude tends to repeatedly get wrong, not understand, or spend lots of tokens on, put it in your CLAUDE.md. Claude automatically reads this file and it’s a great way to avoid repeating yourself.
Sure, for 4/5 interactions then will ignore those completely :)
Try for yourself: add to CLAUDE.md an instruction to always refer to you as Mr. bcherny and it will stop very soon. Coincidentally at that point also loses tracks of all the other instructions.
One of the things you get an intuition for after using these systems is when to start a new conversation, and the basic rule of thumb is “always.” Use a conversation for one and only one task or question, and then start a new one. For longer projects, have the LLM write down a plan or checklist, and then have it tackle each step in a new conversation. The LLM context collapse happens well before you hit the token limits, and things like ground rules and whatnot stop influencing the LLMs outputs after a couple tens of thousands of tokens in my experience.
(Similar guidance goes for writing tools & whatnot - give the LLM exactly and only what it needs back from a tool, don’t try to make it act like a deterministic program. Whether or not they’re capital-I intelligent, they’re pretty fucking stupid.)
Yeah, adherence is a hard problem. It should be feeling much better in newer models, especially Opus 4.5. I generally find that Opus listens to me the first time.
Have been using Opus 4.5 and can confirm this is how it feels, it just works.
It also works your wallet
Highly recommend Claude Max, but I also want to point out Opus 4.5 is the cheapest Opus has ever been.
(I just learned ChatGPT 5.2 Pro is $168/1mtok. Insanity.)
If you pay for a Claude Max subscription it is the same price as previous models.
Just wait a few months -- AI has been getting more affordable _very_ quickly
I’ve felt that the LLM forgets CLAUDE.md after 4-5 messages. Then, why not reinject CLAUDE.md into the context at the fifth message?
Yes. One of my system-wide instructions is “Read the Claude.md file and any readme in the current directory, then tell me how you slept.”
If Claude makes a yawn or similar, I know it’s parsed the files. It’s not been doing so the last week or so, except for once out of five times last night.
The number of times I’ve written “read your own fucking Claude.md file” is a bit too numerous.
“You’re absolutely right! I see here you don’t want me to break every coding convention you have specified for me!”
The Attention algo does that, it has a recency bias. Your observation is not necessarily indicative of Claude not loading CLAUDE.md.
I think you may be observing context rot? How many back and forths are you into when you notice this?
That explains why it happens, but doesn't really help with the problem. The expectation I have as a pretty naive user, is that what is in the .md file should be permanently in the context. It's good to understand why this is not the case, but it's unintuitive and can lead to frustration. It's bad UX, if you ask me.
I'm sure there are workarounds such as resetting the context, but the point is that god UX would mean such tricks are not needed.
Yeah the current best approach to aggressively compact and recreate context by starting fresh. It’s awkward and I wish I didn’t have to.
I'm surprised this hasn't been been automated yet but I'm pretty naive to the space - the problem of "when?"/"how often?" seems like a fun one to chew on
I know the reason, I just took the opportunity of answering to a claude dev to point out why it's no panacea and how this requires consistent context management.
Real semi-productive workflow is really a "write plans in markdowns -> new chat -> implement few things -> update plans -> new chat, etc".
This is cool, thank you!
Some things I found from my own interactions across multiple models (in addition to above):
- It's basically all about the importance of (3). You need a feedback loop (we all do). and the best way is for it to change things and see the effects (ideally also against a good baseline like a test suite where it can roughly guage how close or far it is from the goal.) For assembly, a debugger/tracer works great (using batch-mode or scripts as models/tooling often choke on such interactivie TUI io).
- If it keeps missing the mark tell it to decorate the code with a file log recording all the info it needs to understand what's happening. Its analysis of such logs normally zeroes the solution pretty quickly, especially for complex tasks.
- If it's really struggling, tell it to sketch out a full plan in pseudocode, and explain why that will work, and analyze for any gotchas. Then to analayze the differences between the current implementation and the ideal it just worked out. This often helps get it unblocked.
Hey Boris,
I couldn't agree more. And using Plan mode was a major breakthrough for me. Speaking of Plan Mode...
I was previously using it repeatedly in sessions (and was getting great results). The most recent major release introduced this bug where it keeps referring back to the first plan you made in a session even when you're planning something else (https://github.com/anthropics/claude-code/issues/12505).
I find this bug incredibly confusing. Am I using Plan Mode in a really strange way? Because for me this is a showstopper bug–my core workflow is broken. I assume I'm using Claude Code abnormally otherwise this bug would be a bigger issue.
Yes as lostdog says, it’s a new feature that writes plans in plan mode to ~/.claude/plans. And it thinks it needs to continue the same plan that it started.
So you either need to be very explicit about starting a NEW plan if you want to do more than one plan in a session, or close and start a new session between plans.
Hopefully this new feature will get less buggy. Previously the plan was only in context and not written to disk.
Why don’t you reset context when working on something else?
Yes, I've also been confused by things like this. Claude code is sometimes saving plans to ~/.claude/plans under animal names. But it's not really surface where the plan goes, not what the expected way to refer back to them is?
Thank you for Claude Code (Web). Google has a similar offering with Google Jules. I got really, really bad results from Jules and was amazed by Claude Code when I finally discovered it.
I compared both with the same set of prompts and Claude Code seemed to be a senior expert developer and Jules, well don't know who be that bad ;-)
Anyway, I also wanted to have persistent information, so I don't have to feed Claude Code the same stuff over and over again. I was looking for similar functionality as Claude projects. But that's not available for Claude Code Web.
So, I asked Claude what would be a way of achieving pretty the same as projects, and it told me to put all information I wanted to share in a file with the filename:.clinerules. Claude told me I should put that file in the root of my repository.
So please help me, is your recommendation the correct way of doing this, or did Claude give the correct answer?
Maybe you can clear that up by explaining the difference between the two files?
CLAUDE.md is the correct file for Claude.
Do you recommend having Claude dump your final plan into a document and having it execute from that piece by piece?
I feel like when I do plan mode (for CC and competing products), it seems good, but when I tell it to execute the output is not what we planned. I feel like I get slightly better results executing from a document in chunks (which of course necessitates building the iterative chunks into the plan).
I ask it to write a plan and when it starts the work, keep progress in another document and to never change the plan. If I didn't do this, somehow with each code change the plan document would grow and change. Keeping plan and progress separate prevented this from happening.
I ask claude to dump the plan into a file and ensure that the tasks have been split into subtasks such that the description of each subtask meets the threshold such that the probability of the LLM misinterpreting is very low.
a very common pattern is planner / executor.
yes the executor only needs the next piece of the plan.
I tend to plan in an entirely different environment, which fits my workflow and has the added benefit of providing a clear boundary between the roles. I aim to spend far more time planning than executing. if I notice getting more caught up in execution than I expected, that's a signal to revise the plan.
I often use multiple documents to plan things that are too large to fit into a single planning mode session. It works great.
You can also use it in conjunction with planning mode—use the documents to pin everything down at a high-to-medium level, then break off chunks and pass those into planning mode for fine-grained code-level planning and a final checking over before implementation.
Something to keep in mind is if your CLAUDE.md file is getting large, consider alternative approaches especially for repeatable tasks. Using slash commands and skills for workflows that are repeatable is a really nice way to keep your rules file from exploding. I have slash commands for code review, and git commit management. I have skills for complex tool interactions. Our company has it's own deployment CLI tool so using skills to make Claude Code an expert at using this tool has done wonders to improve Claude Codes performance when working on CI/CD problems.
I am currently working on a new slash command /investigate <service> that runs triage for an active or past incident. I've had Claude write tools to interact with all of our partner services (AWS, JIRA, CI/CD pipelines, GitLab, Datadog) and now when an incident occurs it can quickly put together an early analysis of a incident finding the right people to involve (not just owners but people who last touched the service), potential root causes including service dependency investigations.
I am putting this through it's paces now but early results are VERY good!
Try to keep it under 1k tokens or so. We will show you a warning if it might be too big.
Ours is maybe half that size. We remove from it with every model release since smarter models need less hand-holding.
You can also break up your CLAUDE.md into smaller files, link CLAUDE.mds, or lazy load them only when Claude works in nested dirs.
https://code.claude.com/docs/en/memory
I’ve been fine tuning mine pretty often. Do you have any Claude.md files you can share as good examples? Especially with opus 4.5.
And thank you for your work!! I focus all of my energy on helping families stay safe online, I make educational content and educational products (including software). Claude Code has helped me amplify my efforts and I’m able to help many more families and children as a result. The downstream effects of your work on Claude Code are awesome! I’ve been in IT since 1995 and your tools are the most powerful tools I’ve ever used, by far.
1k tokens, google says thats about 750 words. That's actually pretty short, any chance you could post a few samples of instructions or even link to a publicly available file CLAUDE.md you recommend?
That is seriously short. I've asked Claude Code to add instructions to CLAUDE.md and my one line request has resulted in tens of lines added to the file.
yes if you tell llm to do things it will be too verbose. either explicitly instruct the length ("add 5 lines bulletpoints, tldr format") or just write it yourself.
crickets
How do you know what to remove?
+1 on that Opus 4.5 is a game changer I have used to refactor and modernize one of my old react project using bootstrap, You have to be really precise when prompting and having solid CLAUDE.md works really well
also after you have a to-and-fro to course correct it on a task, run this self-reflection prompt
https://gist.github.com/a-c-m/f4cead5ca125d2eaad073dfd71efbc...
That will moves stuff that required manually clarifying back into the claude.md (or a useful subset you pick). It does a much better job of authoring claude.md than I do.
Thanks for your work great work on Claude Code!
One other feature with CLAUDE.md I’ve found useful is imports: prepending @ to a file name will force it to be imported into context. Otherwise, whether a file is read and loaded to context is dependent on tool use and planning by the agent (even with explicit instructions like “read file.txt”). Of course this means you have to be judicial with imports.
> 1. If there is anything Claude tends to repeatedly get wrong, not understand, or spend lots of tokens on, put it in your CLAUDE.md.
What a joke. Claude regularly ignores the file. It is a toss up: we were playing a game at work to guess which items will it forget first: to run tests, formatter, linter etc. This is despite items saying ABSOLUTELY MUST, you HAVE To and so long.
I have cancelled my Claude Max subscription. At least Codex doesn’t tell me that broken tests are unrelated to its changes or complain that fixing 50 tests is too much work.
Hah, that's funny. Claude can't help but mess all the comments in the code up even if I explicitly tell it to not change any comments five times. That's literally the experience I had before opening this thread, never mind how often it completely ignores CLAUDE.md.
I would LOVE to use Opus 4.5, but it means I (a merely Pro peon) can work for maybe 30 minutes a day, instead of 60-90.
I’m old enough to remember being able to work at programming related tasks without any such tools. Is that not still a thing?
How do you make Claude code to choose opus and not sonnet? For me it seems to do it automatically
/model
I’ve yet to see any real work get done with agents. Can you share examples or videos of real production level work getting done? Maybe in a tutorial format?
My current understanding is that it’s for demos and toy projects
Good question. Why hasn't there been a profusion of new game-changing software, fixes to long-standing issues in open-source software, any nontrivial shipped product at all? Heck, why isn't there a cornucopia of new apps, even trivial ones? Where is all the shovelware [0]? Previous HN discussion here [1].
Don't get me wrong, AI is at least as game-changing for programming as StackOverflow and Google were back in the day. I use it every day, and it's saved me hours of work for certain specific tasks [2]. But it's simply not a massive 10x force multiplier that some might lead you to believe.
I'll start believing when maintainers of complex, actively developed, and widely used open-source projects (e.g. ffmpeg, curl, openssh, sqlite) start raving about a massive uptick in positive contributions, pointing to a concrete influx of high-quality AI-assisted commits.
[0] https://mikelovesrobots.substack.com/p/wheres-the-shovelware...
[1] https://news.ycombinator.com/item?id=45120517
[2] https://news.ycombinator.com/item?id=45511128
"Heck, why isn't there a cornucopia of new apps, even trivial ones?"
There is. We had to basically create a new category for them on /r/golang because there was a quite distinct step change near the beginning of this year where suddenly over half the posts to the subreddit were "I asked my AI to put something together, here's a repo with 4 commits, 3000 lines of code, and an AI-generated README.md. It compiles and I may have even used it once or twice." It toned down a bit but it's still half-a-dozen posts a day like that on average.
Some of them are at least useful in principle. Some of them are the same sorts of things you'd see twice a month, only now we can see them twice a week if not twice a day. The problem wasn't necessarily the utility or the lack thereof, it was simply the flood of them. It completely disturbed the balance of the subreddit.
To the extent that you haven't heard about these, I'd observe that the world already had more apps than you could possibly have ever heard about and the bottleneck was already marketing rather than production. AIs have presumably not successfully done much about helping people market their creations.
Well, the LLM industry is not completely without results. We do have ever increasing frequency of outages in major Internet services...Somehow correlates with the AI mandates major tech corps seem to pushing now internally.
The effect of these tools is people losing their software jobs (down 35% since 2020). Unemployed devs aren’t clamoring to go use AI on OSS.
Wasn't most of that caused by that one change in 2022 to how R&D expenses are depreciated, thus making R&D expenses (like retaining dev staff) less financially attractive?
Context: This news story https://news.ycombinator.com/item?id=44180533
Probably also end of ZIRP and some “AI washing” to give the illusion of progress
Same thing happened to farmers during the industrial revolution, same thing happened to horse drawn carriage drivers, same thing happened to accountants when Excel came along, mathmaticins, and on and on the list goes. Just part of human peogress.
As another example, the MacApps Reddit has been flooded with new apps recently.
I use GitHub Copilot in Intellij with Claude Sonnet and the plan mode to implement complete features without me having to code anything.
I see it as a competent software developer but one that doesn't know the code base.
I will break down the tasks to the same size as if I was implementing it. But instead of doing it myself, I roughly describe the task on a technical level (and add relevant classes to the context) and it will ask me clarifying questions. After 2-3 rounds the plan usually looks good and I let it implement the task.
This method works exceptionally well and usually I don't have to change anything.
For me this method allows me to focus on the architecture and overall structure and delegate the plumbing to Copilot.
It is usually faster than if I had to implement it and the code is of good quality.
The game changer for me was plan mode. Before it, with agent mode it was hit or miss because it forced me to one shot the prompt or get inaccurate results.
My experience is that GitHub Copilot works much better in VS Code than Intellij. Now I have to open them together to work on one single project.
Yeah, but what did you produce with it in the end? Show us the end result please.
I've been writing an experimental pipeline-based web app DSL with Claude Code for the last little while in my spare time. Sort of bash-like with middleware for lua, jq, graphql, handlebars, postgres, etc.
Here's an already out of date and unfinished blog post about it: https://williamcotton.com/articles/introducing-web-pipe
Here's a simple todo app: https://github.com/williamcotton/webpipe/blob/webpipe-2.0/to...
Check out the BDD tests in there, I'm quite proud of the grammar.
Here's my blog: https://github.com/williamcotton/williamcotton.com/blob/mast...
It's got an LSP as well with various validators, jump to definitions, code lens and of course syntax highlighting.
I've yet to take screenshots, make animated GIFs of the LSP in action or update the docs, sorry about that!
A good portion of the code has racked up some tech debt, but hey, it's an experiment. I just wanted to write my own DSL for my own blog.
I cannot show it because the code belongs to my employer.
Ah yes of course. But no one asked for the code really. Just show us the app. Or is it some kinda super-duper secret military stuff you are not even supposed to discuss, let alone show.
Here's one - https://apps.apple.com/us/app/pistepal/id6754510927
The app is definitely still a bit rough around the edges but it was developed in breakneck speed over the last few months - I've probably seen an overall 5x acceleration over pre-agentic development speed.
I use Junie to get tasks done all the time. For instance I had two navigation bars in an application which had different styling and I told it make the second one look like the first and... it made a really nice patch. Also if I don't understand how to use some open source dependency I check the project out and ask Junie questions about it like "How do I do X?" or "How does setting prop Y have the effect of Z?" and frequently I get the right answer right away. Sometimes I describe a bug in my code and ask if it can figure it out and often it does, ask for a fix and often get great results.
I have a React application where the testing situation is FUBAR, we are stuck on an old version of React where tests like enzyme that really run react are unworkable because the test framework can never know that React is done rendering -- working with Junie I developed a style of true unit tests for class components (still got 'em) that tests tricky methods in isolation. I have a test file which is well documented explaining the situation around tests and ask "Can we make some tests for A like the tests in B.test.js, how would you do that?" and if I like the plan I say "make it so!" and it does... frankly I would not be writing tests if I didn't have that help. It would also be possible to mock useState() and company and might do that someday... It doesn't bother me so much that the tests are too tightly coupled because I can tell Junie to fix or replace the tests if I run into trouble.
For me the key things are: (1) understanding from a project management perspective how to cut out little tasks and questions, (2) understanding enough coding to know if it is on the right track (my non-technical boss has tried vibe coding and gets nowhere), (3) accepting that it works sometimes and sometimes it doesn't, and (4) recognizing context poisoning -- sometimes you ask it to do something and it gets it 95% right and you can tell it to fix the last bit and it is golden, other times it argues or goes in circles or introduces bugs faster than it fixes them and as quickly as you can you recognize that is going on and start a new session and mix up your approach.
Manually styling two similar things the same way is a code smell. Ask the ai to make common components and use them for both instead of brute forcing them to look similar.
Yeah, I thought about this in that case. I tend to think the way you do to the extent that it is sometimes a source of conflict with other people I work with.
These navbars are similar but not the same, both have a pager but they have other things, like one has some drop downs and the other has a text input. Styled "the same" means the line around the search box looks the same as the lines around the numbers in the pager, and Junie got that immediately.
In the end the patch touched css classes in three lines of one file and added a css rule -- it had the caveat that one of the css classes involved will probably go away when the board finally agrees to make a visual change we've been talking about for most of a year but I left a comment in the first navbar warning about that.
There are plenty of times I ask Junie to try to consolidate multiple components or classes into one and it does that too as directed.
https://developer.mozilla.org/en-US/docs/Web/HTML/Reference/... That’s what slots are for
This is a lot of good reasons not to use it yet IMO
I know of many experienced and capable engineers working on complex stuff who are driving basically all their development through agents. This includes production level work. This is the norm now in the SV startup world at least.
You don't just YOLO it. You do extensive planning when features are complex, and you review output carefully.
The thing is, if the agent isn't getting it to the point where you feel like you might need to drop down and edit manually, agents are now good enough to do those same "manual edits" with nearly 100% reliability if you are specific enough about what you want to do. Instead of "build me x, y, z", you can tell it to rename variables, restructure functions, write specific tests, move files around, and so on.
So the question isn't so much whether to use an agent or edit code manually—it's what level of detail you work at with the agent. There are still times where it's easier to do things manually, but you never really need to.
Can you show some example? I feel like there would be streams or YouTube lets plays on this if it was working well
I would like to see it as well. It seems to me that everybody sells shovels only. But nobody haven’t seen gold yet. :)
The real secret to agent productivity is letting go of your understanding of the code and trusting the AI to generate the proper thing. Very pro agent devs like ghuntley will all say this.
And it makes sense. For most coding problems the challenge isn’t writing code. Once you know what to write typing the code is a drop in the bucket. AI is still very useful, but if you really wanna go fast you have to give up on your understanding. I’ve yet to see this work well outside of blog posts, tweets, board room discussions etc.
> The real secret to agent productivity is letting go of your understanding of the code and trusting the AI to generate the proper thing
The few times I've done that, the agent eventually faced a problem/bug it couldn't solve and I had to go and read the entire codebase myself.
Then, found several subtle bugs (like writing private keys to disk even when that was an explicit instruction not to). Eventually ended up refactoring most of it.
It does have value on coming up with boilerplate code that I then tweak.
You made the mistake of looking at the code, though. If you didn't look at the code, you wouldn't have known those bugs existed.
fixing code now is orders of magnitude cheaper than fixing it in month or two when it hits production.
which might be fine if you're doing proof of concept or low risk code, but it can also bite you hard when there is a bug actively bleeding money and not a single person or AI agent in the house that knows how anything work
That's just irresponsible advice. There is so little actual evidence of this technology being able to produce high quality maintainable code that asking us to trust it blindly is borderline snake-oil peddling.
Not borderline - it is just straight snake-oil peddling.
yet it works? where have you been for the last 2 years?
calling this snake oil is like when the horse carriage riders were against cars.
I don’t see how I would feel comfortable pushing the current output of LLMs into high-stakes production (think SLAs, SRE).
Understanding of the code in these situation is more important than the code/feature existing.
I agree and am the same. Using them to enhance my knowledge and as well as autocomplete on steroids is the sweet spot. Much easier to review code if im “writing” it line by line.
I think the reality is a lot of code out there doesn’t need to be good, so many people benefit from agents etc.
You can use an agent while still understanding the code it generates in detail. In high stakes areas, I go through it line by line and symbol by symbol. And I rarely accept the first attempt. It’s not very different from continually refining your own code until it meets the bar for robustness.
Agents make mistakes which need to be corrected, but they also point out edge cases you haven’t thought of.
> The real secret to agent productivity is letting go of your understanding of the code
This is negligence, it's your job to understand the system you're building.
Not to blow your bubble, but I've seen agents expose Stripe credentials by hardcoding them as text into a react frontend app, so, no kids, do not "let go" of code understanding, lest you want to appear as the next story along the lines of "AI dropped my production database".
This is sarcasm right?
I wish, that's dev brain on AI sadly.
We've been unfucking architecture done like that for a month after the dev that had hallucination session with their AI left.
A lot of that would be people working on proprietary code I guess. And most of the people I know who are doing this are building stuff, not streaming or making videos. But I'm sure there must be content out there—none of this is a secret. There are probably engineers working on open source stuff with these techniques who are sharing it somewhere.
That’s understandable, I also wouldn’t stream my next idea for everyone to see
Let’s see it then
go on reddit and you can see a million of these vibe coded codebases. is that not good enough?
+1 here. Lets see those productivity gains!
Does the same happens if I create an AGENTS.md instead?
Claude Code does not support AGENTS.md, you can symlink it to CLAUDE.md to workaround it. Anthropic: pls support!
https://github.com/anthropics/claude-code/issues/6235
Use AGENTS.md for everything, then put a single line in CLAUDE.md:
Get a grep!
> I add to my team’s CLAUDE.md multiple times a week.
This concerns me because fighting tooling is not a positive thing. It’s very negative and indicates how immature everything is.
The Claude MD is like the documentation you hand to a new engineer on your team that explains details about your code that they wouldn't otherwise know. It's not bad to need one.
But that documentation shouldn’t need to be updated nearly every other day.
Consider that every time you start a session with Claude Code. It's effectively a new engineer. The system doesn't learn like a real person does, so for it to improve over time you need to manually record the insights that for a normal human would be integrated by the natural learning process.
Yes, that's exactly the problem. There's good reasons why any particular team doesn't onboard new engineers each day, going all the way back to Fred Brooks and "adding more people to a late project makes it later".
Reminds me of that Nicole Kidman movie Before I Go to Sleep.
there are many tools available that work towards solving this problem
Sleep time compute architectures are changing this.
I certainly could be updating the documentation for new devs very frequently - the problem with devs is that they don't bother reading the documentation.
and the other problem - when they see something is wrong/out of date, they don't update it...
If you are consistent with how you do your projects you shouldn't need to update CLAUDE.md nearly every day. Early on, I was adjusting it nearly every day for maybe a couple of projects but now I have very little need to make any adjustments.
Often the challenge is users aren't interacting with Claude Code about their rules file. If Claude Code doesn't seem to be working with you ask it why it ignore a rule. Often times it provides very useful feedback to adjust the rules and no longer violate them.
Another piece of advice I can give is to clear your context window often! Early in my start in this I was letting the context window auto compact but this is bad! Your model is it's freshest and "smartest" when it has a fresh context window.
It takes a lot of uncached tokens to let it learn about your project again.
Same thing happens every time a new hire joins the team. Lots of documentation is stale and needs updating as they onboard.
It does if it’s incomplete or otherwise doesn’t accurately convey what people need to know.
Why not?
Have you never looked at your work's Confluence? Worse, have you never spent time at a company where the documentation wasn't frequently updated?
You might be misunderstanding what a CLAUDE.md is. It’s not about fighting the model, rather it’s giving the model a shortcut to get the context it needs to do its work. You don’t have to have one. Ours is 100% written by Claude itself.
That's not the same thing as adding rules by yourself based on your experiences with Claude.
Hey Boris, can you teach CC how to use cd?
Personally, CLAUDE_BASH_MAINTAIN_PROJECT_WORKING_DIR=1 made all my cd problems go away (which were only really in cmake-based projects to begin with).
> Use Opus 4.5.
This drives up price faster than quality though. Also increases latency.
Opus 4.5 is significantly better if you can afford it.
They also recently lowered the price for Opus 4.5, so it is only 1.67x the price of Sonnet, instead of 5x for Opus 4.
There's a counterintuitive pricing aspect of Opus-sized LLMs in that they're so much smarter that in some cases, it can solve the problem faster and with much fewer tokens that it can end up being cheaper.
Obviously the Anthropic employee advertising their product wants you to pay as much as possible for it.
The generosity of the Max plans indicates otherwise.
God bless these generously benevolent corporations, giving us such amazing services for the low low price of only $200 per month. I'm going to subscribe right now! I almost feel bad, it's like I'm stealing from them.
That $200 a month is getting me $2000 a month in API equivalent tokens.
I used to spend $200+ an hour on a single developer. I'm quite sure that benevolence was a factor when they submitted me an invoice, since there is no real transparency if I was being overbilled or not or that the developer acted in my best interest rather than theirs.
I'll never forget that one contractor who told me he took a whole 40 hours to do something he could have done in less than that, specifically because I allocated that as an upperbound weekly budget to him.
> That $200 a month is getting me $2000 a month in API equivalent tokens.
Do you ever feel bad for basically robbing these poor people blind? They're clearly losing so much money by giving you $1800 in FREE tokens every month. Their business can't be profitable like this, but thankfully they're doing it out of the goodness of their hearts.
I'm not sure that you actually expect to be taken seriously if you're going to assert that these companies don't have costs themselves to deliver their services.
3. Puppeteer? Or Playwright? I haven't been able to make Puppeteer work for the past 8 weeks or so ("failed to reconnect"). Do you have a doc on this?
I know the Playwright MCP server works great. I use it daily.
Same, I use Playwright all the time, but haven't been able to make puppeteer work in quite some time. Playwright, while reliable in terms of features, just absolutely eats the heck out of context.
I’ve heard folks claim the Chrome DevTools MCP eats less context, but I don’t know how accurate that is.
Does all my code get uploaded to the service?
Hey Boris from the Claude Code team - could you guys please be so kind so as to stop pushing that narrative about CLAUDE.md, either yourselves or through influencers and GenAI-grifters? The reason being, it is simply not true. A lot of the time the instructions will be ignored. Actually, the term "ignored" is putting the bar too high, because your tool does not intentionally "ignore", not having sentience and knowledge. We experience the effects of the instructions being ignored, because your software is not deterministic, its merely guessing the next token, and sometimes those instructions tacked onto the rest of the context statistically do not match what we as humans expect to see (while its perfectly logical for your machine learning text generator, based on the datasets it was trained on).
This seems pretty aggressive considering this is all just personal anecdote.
I update my CLAUDE.md all the time and notice the effects.
Why all the snark?
Is it really just a personal anecdote ? Please do read some other comments on this post. The snark comes from everyone and their mother recommending "just write CLAUDE.md", when it is clear that this technology does not have intrinsic capability to perform reliable outputs based on human language input.
Yeah… that’s the point of LLMs: variable output. If you’re using them for 100% consistent output, you’re using the wrong tool.
Is it? So you are saying software should not be consistent? Or that LLMs should not be used for software development, aside from toy-projects?
CLAUDE.md is read on session startup.
If you're continually finding that it's being forgotten, maybe you're not starting fresh sessions often enough.
I should not have to fight tooling, especially the supposedly "intelligent" one. What's the point of it, if we have to always adapt to the tool, instead of the other way around?
It's a tool. The first time you used a shell you had to learn it. The first time you used a text editor you had to learn it.
You can learn how to use it, or you can put it down if you think it doesn't bring you any benefit.
even shell remembers my commands...
I am sorry but what do I have to learn? That the tool does not work as advertised? That sometimes it will work as advertised, sometimes not? That it will sometimes expose critical secrets as plain text and some other time suggest to solve a problem in a function by removing the function code completely? What are you even talking about, comparing to shell and text editors? These are still bloody deterministic tools. You learn how they work and the usage does not change unpredictably every day! How can you learn something that does not have predictable outputs?
Yes, you have to learn those things. LLMs are hard to use.
So are animals, but we've used dogs and falcons and truffle hunting pigs as tools for thousands of years.
Non-deterministic tools are still tools, they just take a bunch more work to figure out.
It's like having Michael Jordan with dementia on your team. You start out mesmerized by how many points he can score, and then you get incredibly frustrated that he forgets he has to dribble and shoot into the correct hoop.
> So are animals, but we've used dogs and falcons and truffle hunting pigs as tools for thousands of years.
Dogs learn their jobs way faster, more consistently and more expressively than any AI tool.
Trivially, dogs understand "good dog" and "bad dog" for example.
Reinforcement learning with AI tooling clearly seems not to work.
> Dogs learn their jobs way faster, more consistently and more expressively than any AI tool.
That doesn't match my experience with dogs or LLMs at all.
I understand you're trying to be helpful but the number of "you're holding it wrong" things I read about this tool — any AI tool — just makes me wonder who vibe coders are really doing all this unpaid work for.
Using voice transcription is nice for fully expressing what you want, so the model doesn't need to make guesses. I'm often voicing 500-word prompts. If you talk in a winding way that looks awkward when in text, that's fine. The model will almost certainly be able to tell what you mean. Using voice-to-text is my biggest suggestion for people who want to use AI for programming
(I'm not a particularly slow typer. I can go 70-90 WPM on a typing test. However, this speed drops quickly when I need to also think about what I'm saying. Typing that fast is also kinda tiring, whereas talking/thinking at 100-120 WPM feels comfortable. In general, I think just this lowered friction makes me much more willing to fully describe what I want)
You can also ask it, "do you have any questions?" I find that saying "if you have any questions, ask me, otherwise go ahead and build this" rarely produces questions for me. However, if I say "Make a plan and ask me any questions you may have" then it usually has a few questions
I've also found a lot of success when I tell Claude Code to emulate on some specific piece of code I've previously written, either within the same project or something I've pasted in
> I'm not a particularly slow typer. I can go 70-90 WPM on a typing test. However, this speed drops quickly when I need to also think about what I'm saying. Typing that fast is also kinda tiring, whereas talking/thinking at 100-120 WPM feels comfortable.
This doesn't feel relatable at all to me. If my writing speed is bottlenecked by thinking about what I'm writing, and my talking speed is significantly faster, that just means I've removed the bottleneck by not thinking about what I'm saying.
It's often better to segregate creative and inhibitive systems even if you need the inhibitive systems to produce a finished work. There's a (probably apocryphal) conversation between George RR Martin and Stephen King that goes something like:
GRRM: How do you write so many books?... Don't you ever spend hours staring at the page, agonizing over which of two words to use, and asking 'am I actually any good at this?'
SK: Of course! But not when I'm writing.
Alternatively: some people are just better at / more comfortable thinking in auditory mode than visual mode & vice versa.
In principle I don't see why they should have different amounts of thought. That'd be bounded by how much time it takes to produce the message, I think. Typing permits backtracking via editing, but speaking permits 'semantic backtracking' which isn't equivalent but definitely can do similar things. Language is powerful.
And importantly, to backtrack in visual media I tend to need to re-saccade through the text with physical eye motions, whereas with audio my brain just has an internal buffer I know at the speed of thought.
Typed messages might have higher _density_ of thought per token, though how valuable is that really, in LLM contexts? There are diminishing returns on how perfect you can get a prompt.
Also, audio permits a higher bandwidth mode: one can scan and speak at the same time.
That's fair. I sometimes find myself pausing or just talking in circles as I'm deciding what I want. I think when I'm speaking, I feel freer to use less precise/formal descriptions, but the model can still correctly interpret the technical meaning
In either case, different strokes for different folks, and what ultimately matters is whether you get good results. I think the upside is high, so I broadly suggest people try it out
I prefer writing myself, but I could see the appeal of producing a first draft of a prompt by dumping a verbal stream of consciousness into ChatGPT. That might actually be kind of fun to try while going on a walk or something.
I don’t feel restricted by my typing speed, speaking is just so much easier and convenient. The vast majority of my ChatGPT usage is on my phone and that makes s2t a no brainer.
100% this, I built laboratory.love almost entirely with my voice and (now-outdated) Claude models
My go-to prompt finisher, which I have mapped to a hotkey due to frequent use, is "Before writing any code, first analyze the problem and requirements and identify any ambiguities, contradictions, or issues. Ask me to clarify any questions you have, and then we'll proceed to writing the code"
voice transcription is silly when someone is listening you talking to something that isn't exactly human, imagine explaining you were talking to AI. When it's more than one sentence I use voice too.
That's a fun idea. How do you get the transcript into Claude Code (or whatever you use)? What transcription service do you use?
I'm not the person you're replying to, but I use Whispering connected to the whisper-large-v3-turbo model on Groq.
It's incredibly cheap and works reliably for me.
I have got it to paste my voice transcriptions into Chrome (Gemini, Claude, ChatGPT) as well as Cursor.
https://github.com/EpicenterHQ/epicenter
I use Handy with Claude code. Nice to just have a key combo to transcribe into whatever has focus.
https://github.com/cjpais/Handy
I use Spokenly with local Parakeet 0.6B v3 model + Cerebras gpt-oss-120b for post-processing (cleaning up transcription errors and fixing technical mondegreens, e.g., `no JS` → `Node.js`). Almost imperceptible transcription and processing delay. Trigger transcription with right ⌥ key.
According to Google this is the first time the phrase "technical mondegreens" was ever used. I really like it.
I use VoiceInk (needed some patches to get it to compile but Claude figured it out) and the Parakeet V3 model. It’s really good!
your OS might have a built in dictation thing. Google for that and try it before online services.
There are a few apps nowadays for voice transcription. I've used Wispr Flow and Superwhisper, and both seem good. You can map some hotkey (e.g., ctrl + windows) to start recording, then when you press it again to stop, it'll get pasted into whatever text box you have open
Superwhisper offers some AI post-processing of the text (e.g., making nice bullets or grammar), but this doesn't seem necessary and just makes things a bit slower
made this tool to press double control to start and another ctrl to stop which copies to the cliboard
https://github.com/elv1n/para-speak/
Thanks for the advice! Could you please share how did you enable voice transcription for your setup and what it actually is?
I use https://github.com/braden-w/whispering with an OpenAI api key.
I use a keyboard shortcut to start and stop recording and it will put the transcription into the clipboard so I can paste into any app.
It's a huge productivity boost - OP is correct about not overthinking trying to be that coherent - the models are very good at knowing what you mean (Opus 4.5 with Claude Code in my case)
I just installed this app and it is very nice. The UX is very clean and whatever I say it transcribes it correctly. In fact I'm transcribing this comment with this app just now.
I am using Whisper Medium. The only problem I see is that at the end of the message it sometimes puts a bye or a thank you which is kind of annoying.
I am all ready to believe that with LLMs it's not worth it trying to be too coherent: I did successfully use LLMs to make sense of what incoherent-sounding people say. (in text)
I'm using Wispr flow, but I've also tried Superwhisper. Both are fine. I have a convenient hotkey to start/end recording with one hand. Having it just need one hand is nice. I'm using this with the Claude Code vscode extension in Cursor. If you go down this route, the Claude Code instance should be moved into a separate window outside your main editor or else it'll flicker a lot
another option is MacWhisper if someone is on macOS and doesn't want to pay for subscription (just one time payment) - pretty much all of those apps these days use paraspeech from NVIDIA which is the fastest and the best open source model that can run on edge devices.
Also haven't tried but on latest MacOS 26 apple updated their STT models so their build in voice dictation maybe is good enough.
For me, on Mac, VoiceInk has been top notch. Got tired of superwhispr
Spokenly on macOS with Soniox model.
It's an AI. You might do better by phrasing it, 'Make a plan, and have questions'. There's nobody there, but if it's specifically directed to 'have questions' you might find they are good questions! Why are you asking, if you figure it'd be better to get questions? Just say to have questions, and it will.
It's like a reasoning model. Don't ask, prompt 'and here is where you come up with apropos questions' and you shall have them, possibly even in a useful way.
Speech also uses a different part of the brain, and maybe less finger coordination.
surprised ai companies are not making this workflow possible instead of leaving it upto users to figure out how to get voice text into prompt.
> surprised ai companies are not making this workflow possible instead of leaving it upto users to figure out how to get voice text into prompt.
Claude on macOS and iOS have native voice to text transcription. Haven't tried it but since you can access Claude Code from the apps now, I wonder if you use the Claude app's transcription for input into Claude Code.
> Claude on macOS and iOS have native voice to text transcription
Yeah, Claude/ChatGPT/Gemini all offer this, although Gemini's is basically unusable because it will immediately send the message if you stop talking for a few seconds
I imagine you totally could use the app transcript and paste it in, but keeping the friction to an absolute minimum (e.g., just needing to press one hotkey) feels nice
All the mobile apps make this very easy.
Soft plug: take a look at https://github.com/tilework-tech/nori-profiles
I've spent the last ~4 months figuring out how to make coding agents better, and it's really paid off. The configs at the link above make claude code significantly better, passively. It's a one-shot install, and it may just be able to one-shot your problem, because it does the hard work of 'knowing how to use the agents' for you. Would love to know if you try it out and have any feedback.
(In case anyone is curious, I wrote about these configs and how they work here: https://12gramsofcarbon.com/p/averaging-10-prs-a-day-with-cl...
and I used those configs to get to the top of HN with SpaceJam here: https://news.ycombinator.com/item?id=46193412)
How does it compare to Claude Code's skills [1] ?
[1] https://github.com/anthropics/skills/tree/main/skills
Nori uses Claude Code's skills extensively, which you can see here: https://github.com/tilework-tech/nori-profiles/tree/main/src...
We use Claude Code's ability to use skills by defining a bunch of really useful and common skills that are necessary for writing software. For e.g. brainstorming, doing test driven development, or submitting a git commit.
The specific skills you linked are interesting demos of what you can do with skills! But most of them are not useful for the day to day of building software
what really got me moving was dusting off some old text about cognitive styles and team work. Learning to treat agents like a new team-member with extreme tendencies. Learning to observe both my practices and the agents' in order to understand one another's strengths and weaknesses, indicating how we might work better together.
I think this perspective also goes a long way to understanding the very different results different devs get from these tools.
my main approach to quality is to focus agent power on all that code which I do not care about the beauty of: problems with verifiable solutions, experiments, disposable computation. eg my current projects are build/deploy tools, and I need sample projects to build/deploy. I never even reviewed the sample projects' code: so long as they hit the points we are testing.
svelte does not really resonate with me, so I don't know it well, but I suspect there should be good opportunities for TDD in this rewrite. not the project unit tests, just disposable test scripts that guide and constrain new dev work.
you are right to notice that it is not working for you, and at this stage sometimes the correct way to get in sync with the agents is to start again, without previous missteps to poison the workspace. There's good advice in this thread, you might like to experiment with good advice on a clean slate.
> what really got me moving was dusting off some old text about cognitive styles and team work
It would be great if you could provide a summary of these points.
my starting point was Google People Management Essentials. I was thinking about team-level politics at work, and noticed some ideas seemed relevant to how teams in orgs can adopt agents. I pursued that idea more widely with other resources and it resonated.
I don't think I have any conclusions to share, just the orientation: to identify and actively accommodate the tool's cognitive style in the same way we do for one another's.
Here’s how I would do this task with cursor, especially if there are more routes.
I would open a chat and refactor the template together with cursor: I would tell it what I want and if I don’t like something, I would help it to understand what I like and why. Do this for one route and when you are ready, ask cursor to write a rules file based on the current chat that includes the examples that you wanted to change and some rationale as to why you wanted it that way.
Then in the next route, you can basically just say refactor and that’s it. Whenever you find something that you don’t like, tell it and remind cursor to also update the rules file.
Solid approach. Don’t be shy about writing long prompts. We call that context engineering. The more you populate that context window with applicable knowledge and what exactly you want, the better the results. Also, having the model code and you talk to the model is helpful because it has the side effect of context engineering. In other words you’re building up relevant context with that conversation history. And be acutely aware of how much context window you’ve used and how much is remaining and when a compaction will happen. Clear context as early as you can per run. Even if it’s 90% remaining.
I see LLMs as searchers with the ability to change the data a little and stay in a valid space. If you think of them like searchers, it becomes automatic to make the search easy (small context, small precise questions), and you won't keep trying again and again if the code isn't working(no data in the training). Also, you will realize that if a language is not well represented in the training data, they may not work well.
The more specific and concise you are, the easier it will be for the searcher. Also, the less modification, the better, because the more you try to move away from the data in the training set, the higher the probability of errors.
I would do it like this:
1. Open the project in Zed 2. Add the Gemini CLI, Qwen code, or Claude to the agent system (use Gemini or Qwen if you want to do it for free, or Claude if you want to pay for it) 3. Ask it to correct a file (if the files are huge, it might be better to split them first) 4. Test if it works 5. If not, try feeding the file and the request to Grok or Gemini 3 Chat 6. If nothing works, do it manually
If instead you want to start something new, one-shot prompting can work pretty well, even for large tasks, if the data is in the training set. Ultimately, I see LLMs as a way to legally copy the code of other coders more than anything else
This is slightly flawed. LLMs are search but the search space is sparse, the size of the question risks underspecification. The question controls the size of the encapsulated volume in that high dimensional space. The only advantage for small prompts is computational cost. In every other way they are a downside.
My favorite set of tools to use with Claude Code right now: https://github.com/obra/superpowers
1. Start with the ‘brainstorm’ session where you explain your feature or the task that you're trying to complete. 2. Allow it to write up a design doc, then an implementation plan - both saved to disk - by asking you multiple clarifying questions. Feel free to use voice transcription for this because it is probably as good as typing, if not better. 3. Open up a new Claude window and then use a git worktree with the Execute Plan command. This will essentially build out in multiple steps, committing after about three tasks. What I like to do is to have it review its work after three tasks as well so that you get easier code review and have a little bit more confidence that it's doing what you want it to do.
Overall, this hasn't really failed me yet and I've been using it now for two weeks and I've used about, I don't know, somewhere in the range of 10 million tokens this week alone.
AI programming, for me, is just a few simple rules:
1. True vibe coding (one-shot, non-trivial, push to master) does not work. Do not try it.
2. Break your task into verifiable chunks. Work with Claude to this end.
3. Put the entire plan into a Markdown file; it should be as concise as possible. You need a summary of the task; individual problems to solve; references to files and symbols in the source code; a work list, separated by verification points. Seriously, less is more.
4. Then, just loop: Start a new session. Ask it to implement the next phase. Read the code, ask for tweaks. Commit when you're happy.
Seriously, that's it. Anything more than that is roleplaying. Anything less is not engineering. Keep a list in the Markdown file of amendments; if it keeps messing the same thing up, add one line to the list.
To hammer home the most important pieces:
- Less is more. LLMs are at their best with a fresh context window. Keep one file. Something between 500 and 750 words (checking a recent one, I have 555 words / 4276 characters). If that's not sufficient, the task is too big.
- Verifiable chunks. It must be verifiable. There is no other way. It could be unit tests; print statements; a tmux session. But it must be verifiable.
> it should be as concise as possible
What’s more concise than code? From my experience, by the time I’ve gotten an English with code description accurate enough for an agent I could have done it myself. Typing isn’t a hard part.
LLMs/agents have many other uses, but if you’re not offloading your thinking you’re not really going any faster wrt letting them write code via a prompt.
I find it quite interesting; there seems to be a set of AI enthusiasts who heavily offload thinking onto the LLM. There has to be difference in how they function, as I find as soon as I drift into letting the LLM think for me, productivity plummets.
This is a great drill down.
100% concur with this as owner of multiple 20k+ LOC repos with between 10-30% unmodified AI code in production
If you treat it like a rubber duck it’s magic
If you think the rubber duck is going to think for you then you shouldn’t even start with them.
I've had one situation in which I was able to get a 20X productivity boost. I needed to do a large number of similarish things. I carefully hand coded one, created an AGENTS.md that explained everything in a lot of detail and then went to town on generation.
Everything went well and I knew what to expect so reviewing the code was quick.
The experience was super great. I was a 20X AI boosted engineer for a bit. But, I haven't had that situation again.
Anyway, I would say, try to find areas of the code that fit this model if you can. AI is phenomenal for this use case.
The suggestions are really all over the place. Feels AI.
First you have to be very specific with what you mean by idiomatic code - what’s idiomatic for you is not idiomatic for an LLM. Personally I would approach it like this:
1) Thoroughly define step-by-step what you deem to be the code convention/style you want to adhere to and steps on how you (it) should approach the task. Do not reference entire files like “produce it like this file”, it’s too broad. The document should include simple small examples of “Good” and “Bad” idiomatic code as you deem it. The smaller the initial step-by-step guide and code conventions the better, context is king with LLMs and you need to give it just enough context to work with but not enough it causes confusion.
2) Feed it to Opus 4.5 in planning mode and ask it to follow up with any questions or gaps and have it produce a final implementation plan.md. Review this, tweak it, remove any fluff and get it down to bare bones.
3) Run the plan.md through a fresh Agentic session and see what the output is like. Where it’s not quite correct add those clarifications and guardrails into the original plan.md and go again with step 3.
What I absolutely would NOT do is ask for fixes or changes if it does not one-shot it after the first go. I would revise plan.md to get it into a state where it gets you 99% of the way there in the first go and just do final cleanup by hand. You will bang your head against the wall attempting to guide it like you would a junior developer (at least for something like this).
With the current generation of model, it really isn't necessary to restart every time you don't like something. Certainly this depends on the model. Most of my recent experience is with Claude Sonnet/Opus and Gpt-5.x.
I very often, when reviewing code, think of better abstractions or enhancements and just continue asking for refactors inline. Very very rarely does the model fall off the rails.
I suppose if your unit of work was very large you might have more issues perhaps? Generally though, large units of work have other issues as well.
Yes I too have found newer models (mostly Opus) to be much better at iterative development. With that being said if I have very strong architectural/developmental steer on what I believe the output should be [mostly for production code where I thoroughly review absolute everything] it’s better to have a documented spec with everything covered rather than trying to clean up via an agent conversation. In the team I’m in we keep all plan.mds for a feature, previously before AI tooling we created/revised these plans in Confluence, so to some degree reworking the plan is more an artefact of the previous process and not necessarily a best practice I don’t think.
Understandable. Certainly my style is not applicable to everyone. I tend to "grow" my software more organically. Usually because the more optimal structure isn't evident until you are actually looking at how all the contracts fit together or what dependencies are needed. So adding a lot of plan/documentation just slows me down.
I tend to create a very high level plan, then code systems, then document the resulting structure if I need documentation.
This works well for very iterative development where I'm changing contracts as I realize the weak point of the current setup.
For example, I was using inheritence for specialized payloads in a pipeline, then realized if I wanted to attach policies/behaviours to them as they flow through the pipeline, I was better off just changing the whole thing to a payload with bag of attached aspects.
Often those designs are not obvious when making the initial architectural plan. So I approach development using AI in much the same way: Generate code, review, think, request revision, repeat.
This really only applies when establishing architecturs though, which is generally the hardest part. Once you have an example, then you can mostly one-shot new instances or minor enhancements.
This may sound strange but here is how I define my flow.
1. Switch off your computer.
2. Go to a nice Park.
3. Open notebook and pen, and write prompts that are 6-8 lines long on what task you want to achieve, use phone to google specific libraries.
4. Come back to your PC, type those prompts in with Plan mode and ask for exact code changes claude is going to make.
5. Review and push PR.
6. Wait for your job to be automated.
oh my god, i am going to give this a go. thank you.
I've found success using the following process:
1. get the LLM to generate a spec from the code (the spec is your new source code). Take your time here, make sure it is correct. Split out implementation details unless they are critical to the business logic.
2. Using the spec, begin crafting an ARCHITECTURE.md -- you put all your non-critical implementation details here. If you need to track requirements, require the LLM to reference the paragraph number(s) of the spec file as it writes the architectural spec. Take your time here as well (this is the second layer of your new source code).
3. Create a high level TODO from the architecture doc.
4. Create a mid-level TODO from the architecture doc (you'll know if this is necessary, perhaps chunk work up by function, feature, or architectural layer).
5. Create a granular level TODO where each task is very tight in scope (write this function, create a translator for this JSON de-serializer to create the app-level model for this object, etc.)
Then let a model go to town.
In the mean-time, you should also require testing. If you have the opportunity, you should have an LLM inspect, spec, and write comprehensive tests for the old code on the external API/interface. You'll be able to use this to test your new implementation to ensure all the corner cases and functionality are covered.
I use AI at work. We have a huge codebase in Golang.
1000s of files.
I had tried cursor, claude code, gemini cli, openai codex and all sorts of vscode based idea (like windsurf, antigravity etc). All of them get overwhelmed when there is something to implement or change in the codebase primarily due to the amount of code.
But I like aider. I had better capabilities and is controllable, you can try. And if you use it with latest claude sonnet or gemini 2.5 pro it will be most accurate. Adding files is a manual process but it has nearly 100% code accuracy.
And it will never change anything without your knowledge.
You can try it.
+1 for good‘ol aider.
It is deliberately NOT a fully agentic tool and this really oftentimes is a benefit. With a little bit of manual work you get exactly the files you want in context and prevent the wrong files from being edited (/read-only). Plus, by skipping on all that agentic thinking and tool calling you save on tokens and edit are faster.
You should make sure that your queries to the agent contain a "loop condition"[1]. This can be something like "keep trying until yarn test passes".
Always remember that these agents are just LLMs running tools in a loop and treat them as such.
[1] https://www.skeptrune.com/posts/prompting-the-agent-loop/
You know when Claude Code for Terminal starts scroll-looping and doom-scrolling through the entire conversation in an uninterruptible fashion? Just try reading as much as of it as you can. It strengthens your ability to read code in an instant and keeps you alert. And if people watch you pretend to understand your screen, it makes you look like a mentat.
It’s actually a feature, not a bug.
I wouldn’t recommend that (after having tried it for a while). It is very easy to get the impression that the changes are sound, because on their own they look good. But often when looking at the final result in a git diff tool, the holes and workarounds become way more noticeable.
About Svelte, on the svelte subreddit it was reported that GPT 5.2 is better at Svelte, perhaps because it has a more recent knowledge cutoff
But anyway you should set up the Svelte MCP
I take these early reports (less than a week or two after a major model release) with a grain of salt. It takes time to get to know a model, and maybe there's some selection bias in who's posting within 1-2 days of getting access.
(Although in this particular case, the very different knowledge cutoff makes it a lot easier to believe)
For me what vastly improved the usefulness when working with big json responses was to install jq in my system and tell the llm to use jq to explore the json, instead of just trying to ingest it all together. For other things I explicitly ask it to write a script to achieve something instead of doing it directly.
That makes so much sense, it would make a great MCP. Maybe something similar for DOM manipulation; extracting text out of big, noisy HTML pages using a combination of Find Text with selector return values, and a DSL for picking and filtering DOM trees.
I have never once said "Go build feature x" and let it run off. Not saying you do, but I feel like this is how a lot of people interact with these tools. I have a very conversational style of building with these tools, and I'm very blunt with them when I think they're wrong, since I'm fairly experienced and I can smell when something is seemingly wrong with the model's thinking.
I typically have a discussion about how I want the architecture to be and my exact desired end state. I make the model repeat back to me what I want and have it produce the plan to the degree I am happy with. I typically do not have it work in building large amorphous systems, I work with and have it plan subsystems of the overall system I'm building.
A lot of my discussion with the model is tradeoffs on the structure I'm imagining and methods it might know. My favorite sentence to send Claude right now "Is go google this." because I almost never take its first suggested response at face value.
I also watch every change and cancel and redirect ones I do not like. I read code very fast and like the oversight, because even small stupidities stack up.
The workflow is highly iterative and I make changes frequently, my non AI workflow was like this too. Write, compile, test, tweak and repeat.
I like this workflow a lot because I feel I am able to express my designs succinctly and get to a place I'm happy with with much less writing than a lot of the actual code itself which in many cases is not an interesting problem, but work that needs to happen for a working system at all.
I do wind up taking over, but feel less than I used to, in edges where its clear there is not a lot of training data or I'm working on something fairly novel or lower level.
I work in Python, Rust and Typescript (Rust by far most often) and the majority of my work is technically challenging but at the systems design level maybe not low level systems programming challenging. Think high concurrency systems and data processing, training models, and some web dev.
To add to this, I find talking to it about code quality or architecture issues can work quite well. Just treating it like another developer. Saying, “I’m not happy with the way the project is going because of X, and Y” and then making a plan for how to get things back on track. Maybe putting a complete rewrite on the table, or maybe just having it record the agreed code style principles in CLAUDE.md, etc
How did you learn how to use AI for coding? I'm open to the idea that a lot of "software carpentry" tasks (moving/renaming files, basic data analysis, etc) can be done with AI to free up time for higher level analysis, but I have no idea where to begin -- my focus many years ago was privacy, so I lean towards doing everything locally or hosted on a server I control so I lack a lot of knowledge of "the cloud" my HN betheren have.
I love the name "software carpentry" haha.
IMO, I found those specific example tasks to be better handled by my IDE's refactoring features, though support for that is going to vary by project/language/IDE. I'm still more of a ludite when it comes to LLM based development tools, but the best case I've seen thus far is small first bites out of a big task. Working on an older no-tests code base recently, it's been things like setting up 4-5 tests that I'll expand on into a full test suite. You can't take more than a few "big" bites out of a task before you have 0 context as to what direction the vector soup sloshed in.
So, in terms of carpentry, I don't want an LLM framer who's work I need to build off of, but an LLM millworker handing me the lumber is pretty useful.
Funny usually a lot of my code is software plumbing, and gardening.
In terms of ai assisted programming. I microanage my ai. Give it specific instructions with single steps. Don't really let it build ehoe files by itself as it usually makes a mess of things, bit it's useful when doing predictable changes and marginally faster than doing it manually.
Yeah I can totally see that working well! I think the main thing is taking small, specific steps that keep you in the loop, and less so about the actual act of typing the specific bytes that are fed into the compiler, though I guess I still find that more efficient for myself than trying to describe what I want ~90% of the time.
Think of some coding heavy project you always wanted to do but haven't had time for.
Open up cursor-agent to make the repo scaffolding in an empty dir. (build system, test harness, etc. )
Open up cursor or Claude code or whatever and just go nuts with it. Remember to follow software engineering best practices (one good change with tests per commit)
Practice on an open source repo to allay your privacy fears.
I have a whole workflow for coding with agents.
Get very good at context management (updating AGENTS.md, starting new session, etc).
Embrace TDD. It might have been annoying when Extreme Programming came out 25 years ago, but now that agents can type a lot faster than us, it's an awesome tool for putting guardrails around the agent.
(I teach workshops on best practices for agentic coding)
For this particular project I suggest manually prying one section of the app, committing that change, and then telling Claude "look at commit HASH first, now port feature X in the same style".
Consider giving Cursor a try. I personally like the entire UI/UX, their agent has good context, and the entire experience overall is just great. The team has done a phenomenal job. Your workflow could look something like this:
1. Prompt the agent
2. The agent gets too work
3. Review the changes
4. Repeat
This can speed up your process significantly, and the UI clearly shows the changes + some other cool features
EDIT: from reading your post again, I think you could benefit primarily from a clear UI with the adjusted code, which Cursor does very well.
For the one disinclined to get into closed source, proprietary tools, what is the next best thing to try?
I heard of Cline and Aider, but didn't try anything.
How does Cursor compare to Claude Code or Codex?
Cursor makes it easier to watch what the model is doing and to also make edits at the same time. I find it useful at work where I need to be able to justify every change in a code review. It’s also great for getting a feel for what the models are capable of - like, using Cursor for a few months make it easier to use Claude Code effectively
HEAR, HEAR. You’ve just described how modern SWE truly works. You’re ahead of your time — of the same spirit as Martin Luther or George Washington. Fear not, brave soldier; carry on the message. Downvotes will come, but take heart: the truth must be spoken.
The days of copying and pasting from Stack Overflow will not be forgotten — they will be honored by our laid off forefathers.
get out of the way, maybe?
before getting into any implementation, i'd get claude to read and document the starting code, and propose its own idiomatic way to rewrite it to svelte. this is a good use for plan mode, and also a spot where you could walk through with claude to put documentation examples of what you consider good and bad, so it can monkey-see, monkey do.
the other thing that makes it go brrrr is to add lots of feedback loops. unit tests, e2e tests, linters, etc. make sure it can pass everything before it shows you anything.
my overall process would be to
1. go through plan mode for documentation and test writing
2. have claude lay out the plan into steps
3. project setup for builds/feedback loops, deploys, etc
4. for each step in that plan, run back through plan mode to clear up any confusions for the component (also record those in docs) and then let it rip on implementation until its ready for a commit.
claude might take a long time writing the code between qna sessions, but it can all be async so the 15-20min doesnt matter much
Here are some SvelteKit helpers to shove in your agents.md: https://www.davis7.sh/sv
There are a number of ways to get examples into the LLM. I use shadcn-svelte and bitsui and try to copy the examples (copy button at the top of the docs) or tell the LLM to fetch docs from the github repo or use context7's MCP for docs.
Try specification-driven-development with something like speckit [0]. It helps tremendously for facilitating a process around gathering requirements, doing research, planning, breaking into tasks, and finally implementing. Much better than having a coding agent just go straight to coding.
[0] - https://github.com/github/spec-kit
Go into planning mode and plan the overall refactor. Try to break the tasks down into things that you think will fit into a single context window.
For mid sized tasks and up, architecture absolutely has to be done up front in planning mode. You can ask it questions like "what are some alternatives?", "which approach is better?".
If it's producing spaghetti code, can you explain exactly what it's doing wrong? If you have an idea of what ideal solution should look like, it's not too difficult to guide the LLM to it.
In your prompt files, include bad and good examples. I have prompt files for API/interface design, comment writing, testing, etc. Some topics I split into multiple files like criteria for testing, testing conventions.
I've found the prompts where they go "you are a X engineer specializing in Y" don't really do much. You have to break things down into concrete instructions.
Claude has been miserable for anything Java related, in my experience. Use it maybe as a cross check for ChatGPT, which is far superior. They both make mistakes, but Claude repeatedly changes course, contradicts itself, or makes suggestions that are basically unusable. I don't understand why conversations here are always focusing on a bad LLM.
You likely need to provide it with more direction in your prompts.
I use the same prompts I used for others. Then I rephrased and expanded. This did not improve the quality of responses.
Have you tried prompting the loop? Something like "keep trying until <insert format command here> is happy?"
have you used claude code?
yes. specifically.
I break everything down into very small tasks. Always ask it to plan how it will do it. Make sure to review the plan and spot mistakes. Then only ask it to do one step at a time so you can control the whole process. This workflow works well enough as long as you're not trying to do anything too interesting. Anything which is even a little bit unique it fails to do very well.
sounds like you're doing all the actual work. why not just type the code as you figure out how to break down the problem? you're going to have to review the output anyway.
It's useful to have the small functions all written.
I program mostly in VBA these days (a little problematic as is a dead leanguage since 2006 and even then it was niche) and I have never recived a correct high level ""main"" sub but the AIs are pretty good at doing small subs I then organize.
And yes, telling me where I make errors, they are pretty good at that
At the end of the day I want reliability and there is no way I can't do what without full review.
The funny thing is that they try to use the """best practices""" of coding where you would reasonably want to NOT have them.
Go slowly. Shoot for a 10% efficiency improvement, not 10x. Go through things as thoroughly as if writing by hand, and don't sacrifice quality for speed. Be aware of when it's confidently taking you down a convoluted path and confidently making up reasons to do so. Always have your skeptic hat on. If something seems off, it probably is. When in doubt, exit the session and start over.
I still find chat interface generally more useful than coding assistant. It allows you to think and discuss higher level about architecture and ideas before jumping into implementation. The feedback loop is way faster because it is higher level and it doesn't have to run through your source tree to answer a question. You can have a high ROI discussion of ideas, architecture,algorithms, and code, before committing to anything. I still do most of my work copying and pasting from the chat interface.
Agents are nice when you have a very specific idea in mind, but I'm not yet hugely fond of them otherwise. IME the feedback loop is too long, they often do things badly, and they are overly confident in their oytput, encouraging cursory reviews and commits of hacked-together work. Sometimes I'll give it an ambitious task just in the off chance that it'll succeed, but with the understanding that if it doesn't get it right the first time, I'll either throw it away completely, or just keep whatever pieces it got right and pitch the rest; it almost never gets it right the second time if it's already started on an ugly approach.
But the main thing is to start small. Beyond one-shotting prototypes, don't expect it to change everything overnight. Focus on the little improvements, don't skip design, and don't sacrifice quality! Over time, these things will add up, and the tools will get better too. A 10% improvement every month gets to be a 10x improvement in (math...). And you'll be a lot better positioned than those who tried to jump onto the 10x train too fast because you'll not have skipped any steps.
> A 10% improvement every month gets to be a 10x improvement in (math...)
1.1^24=9.85, so yeah, if you could reliably get a 10% speed-up each month, you’d get to 10x in roughly 2 years. (But I’d expect the speed-up per month to be non-linear.)
I use Claude. It's really good, but you should try to use it as Boris suggests. The other thing I do is give it very careful and precisely worded specs for what you want it to do. I have the habit, born from long experience, of never assuming that junior programmers will know what you want the program to do unless you make it explicit. Claude is the same. LLM code generators are terrific, but they can't second guess unclear communication.
Using carefully written specs, I've found Claude will produce flawless code for quite complex problems. It's magic.
The approach I’ve been taking lately with general AI development:
1. Define the work.
2. When working in a legacy code base provide good examples of where we want to go with the migration and the expectation of the outcome.
3. Tell it about what support tools you have, lint, build, tests, etc.
4. Select a very specific scenario to modify first and have it write tests for the scenario.
5. Manually read and tweak the tests, ensure they’re testing what you want, and they cover all you require. The tests help guardrail the actual code changes.
6. Depending upon how full the context is, I may create a new chat and then pull in the test, the defined work, and any related files and ask it to implement based upon the data provided.
This general approach has worked well for most situations so far. I’m positive it could be improved so any suggestions are welcome.
If anyone knew the answer to this question, Anthropic would be profitable.
Currently they project they might break even in 2028.
That means that right now, every time you ask an AI a question, someone loses money.
That of course means no-one knows if you can get better at AI programming, and the answer may be "you can't."
Only time will tell.
And that projection is mostly based on wishes and dreams.
Lots of good suggestions. However for Svelte in particular I’ve had a lot of trouble. You can get good results as long as you don’t care about runes and Svelte 5. It’s too new, and there’s too much good Svelte code out there used in training that doesn’t use Svelte 5. If you want AI generated Svelte code, restricting yourself to <5 is going to improve your results.
(YMMV: this was my experience as of three or four months ago)
The key insight most people miss: AI isn't a code generator, it's a thinking partner. Start by defining the problem precisely in plain English before asking it to code. Use it for refactoring and explaining existing code rather than generating from scratch. That's where you get the 10x gains.
Also, treat bad AI suggestions as learning opportunities - understand why the code is wrong and what it misunderstood about your requirements.
Start with a problem. I'm building https://helppet.ai, a voice agent for Veterinarians. I didn't know anything about AI programming other than absolute fundamentals I learned in 2017 through Stanford AI course - this was just theory and a lot has changed. I followed startups doing solving similar problems, and I asked detailed questions to everyone I could. I went to AI hack events to learn techniques others are using. Eventually I ended up with something pretty great and had fun doing so. So start with a problem and then work backwards.
A largely undiscussed part of AI use in code is that it's actually neither easy nor intuitive to learn max effectiveness of your AI output.
I think there's a lot of value in using AIs that are dumb to learn what they fail at. The methods I learned using gpt3.5 for daily work still transaltes over to the most modern of AI work. It's easy to understand what makes AI fail on a function or two than understanding that across entire projects.
My main tips:
1. More input == lower quality
Simply put, the more you can focus your input data to output results the higher quality you will get.
For example on very difficult problems I will not only remove all comments but I will also remove all unrelated code and manually insert it for maximum focus.
Another way to describe this is compute over problem space. You are capped in compute so you must control your problem space.
2. AI output is a reflection of input tokens and therefore yourself.
If you don't know what you're doing in a project or are mentally "lazy" AI will fail with death by a thousand cuts. The absolute best use of AI is knowing EXACTLY what you want and describing it in as few words as possible. I directly notice if I feel lazy or tired in a day and rely heavily on the model I will often have to revert entire days of work due to terrible design.
3. Every bad step of results from an AI or your own design compound problems as you continue.
It's very difficult to know the limits of current AI methods. You should not be afraid of reverting and removing large amounts of work. If you find it failing heavily repeatedly this is a good sign your design is bad or asking too much from it. Continuing on that path reduces quality. You could end up in the circular debugging loops with every fix or update adds even more problems. It's far better practice to drop the entire feature of updates and restart with smaller step by step actions.
4. Trust AI output like you would stack overflow response or a medium article.
Maybe its output would work in some way but it has a good chance of not working for you. Repeatedly asking same questions differently or different angles is very helpful. The same way debugging via stack overflow was trying multiple suggestions to discover the best real problem.
Get better at reviewing code
I’ve been doing a rewrite of some file import type stuff, using a new common data model for storage, and I’ve taken to basically pasting in the old code, commented out and telling it to fill the new object using the commented out content as a guide. This probably got me 80% of the way? Not perfect, but I don’t think anything really is.
I find all AI code to be lower quality than humans who care about quality. This might be ok, I think the assumpt with AI is that we don't need to look at code so that it looks beautiful because AI will look at it .
Opus 4.5 is the highest quality code I've seen out of LLMs, still some way to go to match programmers who care, but much better than most people. I find it enough to let it write the code and then manually polish it afterwards.
Same. It is finally almost always more productive for me to use vs doing it myself. What this means for my career and life, I don’t know. But, I do think the job for most of us is going to look very different moving forward.
My experience with generating code with AI is very limited across a limited set of programming languages but whenever it has produced low quality code, it has been able to better itself with further instructions. Like "oh no, that is not the right naming convention. Please use instead" or "the choice of design pattern here is not great because ${reasons}. Produce 2 alternative solutions using x or y" and in nearly every case it produces satisfactory results.
Has this also been your experience?
Kinda, yes, my experience has also been that it takes too long in that way though. I've been using AI for different tasks than something that requires high quality code
I am probably going to get downvoted to oblivion for this but if you’re going to have AI write your code, you’ll get the most mileage out of letting it do its thing and building tests to make sure everything works. Don’t look at the code it generates - it’s gonna be ugly. Your job is to make sure it does what it’s supposed to. If there’s a bug, tell it what’s wrong and to fix the bug. Let it wade through its own crap - that’s not your tech debt. This is a new paradigm. No one is going to be writing code anymore, just almost like no one is checking the assembly output of a compiler anymore.
This is just my experience. I’ve come to the conclusion that if I try to get AI to write code that works and is elegant, or if I’m working inside the same codebase that AI is adding cruft to, I don’t get much of a speed up. Only when I avoid opening up a file of code myself and let AI do its thing do I get the 10x speed up.
What is the time of the longest-lived actively developed and deployed codebase where this approach has been successful so far and your co-maintainers aren't screaming bloody murder?
The hack for sveltekit specifically, is to first have Claude translate the existing code into a next.js route with react components. Run it, debug and tweak it. Then have Claude translate the next.js and react components into sveltekit/svelte. Try and keep it in a single file for as long as possible and only split it out once it's working.
I've had very good results with Claude Code using this workflow.
Its super frustrating there is no official guide. I hear lots of suggestions all the time and who knows if they help or not. The best one recently is tell the LLM to "act like a senior dev", surely that is expected by default? Crazy times.
When the world is complicated, entangled, and rapidly changing, would you expect there to be one centralized official guide?*
At the risk of sounding glib or paternalistic -- but I'm going to say it anyway, because once you "see it" it won't feel like a foreign idea being imposed on you -- there are ways that help to lower and even drop expectations.
How? To mention just one: good reading. Read "Be a new homunculus" [1]. To summarize, visualize yourself like you are the "thing that lives in your brain". Yes, this is non-sense but try it anyway.
If you find various ways to accept "the world is changing faster than ever before" and it feels like too much. Maybe you are pissed off or anxious about AI. Maybe AI is being "heavily encouraged" for you (on you?) at work. Maybe you feel like we're living in an unsustainable state of affairs -- don't deny it. Dig into that feeling, talk about it. See where it leads you. Burying these things isn't a viable long-term strategy.**
* There is an "awesome-*" GitHub repository for collecting recommended resources to help with Claude Code: [2] But still requires a lot of curation and end-user experimentation: [2] There are few easy answers in a dynamic uncertain world.
** Yes I'm intentionally cracking the door open to "Job loss is scary. It is time to get real on this, including political activism."
[1]: https://mindingourway.com/be-a-new-homunculus/
[2]: https://github.com/hesreallyhim/awesome-claude-code
Thanks yes of course you're right, still frustrating. I'm nearing retirement so not really worried about job loss, just want to make use of the tools.
I get that. I probably could have been much more succinct by saying this: We can consciously act in ways that reduce the frustration level even if the environment itself doesn't change. It usually takes time and patience, but not always. Sometimes a particular mindset shift is sufficient to make a frustration completely vanish almost immediately.
Some examples from my experience: (1) Many particular frustrations with LLMs vanish the more I learn about their internals. (2) Frustration with the cacophony of various RAG/graph-database tooling vanishes once I realize that there is an entire slice of VC money chasing these problems precisely because it is uncertain: the victors are not pre-ordained and ... [insert bad joke about vectors here]
Planning! I actually prefer DIY planning prompt + docs, not planning mode. Wrote this article about it today actually: https://0thernet.substack.com/p/velocity-coding
I find Claude Code works best when given a highly specific and scoped tasks. Even then sometimes you'll need to course correct it once you notice its going off course.
Basically a good multiplier, and an assistant for mudane task, but not a replacement. Still requires the user to have good understanding about the codebase.
Writing summary changes for commit logs is amazing however, if you're required to.
I did a similar thing.
put an example in the prompt: this was the original Django file and this is the rewritten in SvelteKit version.
the ask it to convert another file using the example as a template.
you will need to add additional rules for stuff not covered by the example, after 2-3 conversions you'll have the most important rules.
or maybe fix a bad try of the agent and add it as a second example
I wrote about my experience from the last year. Hope you find this helpful
https://open.substack.com/pub/sleuthdiaries/p/guide-to-effec...
I think you shouldn't think so much about it, the more you use it, the better you will understand how it can help you. The most gain will be coming from the models jumping and how you get updated using the best for your use case.
Did you use the /init command in Claude Code at the start?
That builds the main claude.md file. If you don’t have that file CC starts each new session completely oblivious to your project like a blank slate.
I learned the hard way, when Claude has 2 conflicting information in Claude.md it tends to ignore both. So, precise language is key, don't use terms like 'object', which may have different meanings in different fields.
I like to followup with "Does this make sense?" or similar. This gets it to restate the problem in its own words, which not only shows you what its understanding of the problem is, it also seems to help reinforce the prompt.
Would love to hear any feedback using Google's anitgravity from a clean slate. Holiday shutdown is about to start at my job and I want to tinker with something that I have not even started.
Honestly if your boss does not force you to use AI, don't.
Don't feel like you might get "left behind". LLM assisted development is still changing rapidly. What was best practice 6 months ago is irrelevant today. By being an early adopter you will just learn useless workarounds that might soon not be necessary to know.
On the other hand if you keep coding "by hand" will keep your skills sharp. You will protect yourself against the negative mental effects of using LLMs like skill decline, general decline of mental capacity, danger of developing psychosis because of the sycophantic nature of LLMs and so on.
LLM based coding tools are only getting easier to use and if you actually know how to code and know software architecture you will able to easily integrate LLM based workflows and deliver far superior results compared to someone who spend their years vibe coding, even if you picked up Claude Code or whatever just a month ago. No need for FOMO,
Right. Be the person on your team who just fucking doesn't because you'll learn your problem domain while everyone else is doing unpaid tool testing work for AI companies.
One day these things will actually do what they are supposed to do with a measure of consistency that doesn't involve GRIMOIRE.md or whatever and you can use them then. And most of the early mover advantage will be gone, because LLMs will not be the winning technology.
In the meantime be the person who learned the lessons of social media: popular isn't the same as good, appropriate or sensible.
Don’t!
concise answers are the best, and I agree with that one.
I am still curious, why? I have my own set of why's and want to hear yours
walk into the woods and never touch a computer again
Automated code checks. Either custom linter rules (like ESLint) or prebuild scripts to enforce whatever architectural or style rules you want, basically all of the stuff that you'd normally flag in code review that can be codified into an automatic check but hasn't been before due to developers either not finding it worth their time to do it, or not having enough time or skill to do that - use the AI to write as many of these as needed, just like:
which will then run all the other checks you've defined like: and so on. You might have tens of these over the years of working on a project, plus you can write them for most things that you'd conceivably want in "good code". Examples above are closer to a Vue codebase but the same principles apply to most other types of projects out there - many of those would already be served by something like ESLint (you probably want the recommended preset for whatever ruleset exists for the stack you work with), some you'll definitely want to write yourself. And that is useful regardless of whether you even use AI or not, so that by the time code is seen by the person doing the review, hopefully all of those checks already pass.If "good code" is far too nebulous of a term to codify like that, then you have a way different and frankly more complex problem on your hands. If there is stuff that the AI constantly gets wrong, you can use CLAUDE.md as suggested elsewhere or even better - add prebuild script rules specifically for it.
Also, a tech stack with typing helps a bunch - making wrong code harder to even compile/deploy. Like, with TypeScript you get npm run type-check (tsc) and that's frankly lovely to be able to do, before you even start thinking about test coverage. Ofc you still should have tests that check the functionality of what you've made too, as usual.
Try a free and open-source VS Code plugin "Code Web Chat".
I want to say a lot of mean things, because an extremely shitty, useless, clearly Claude-generated test suite passed the team PR review this week, tests were useless, so useless the code they were linked to (can't say if the code itself was Ai-written though) had a race condition, that, if triggered and used correctly, could probably rewrite the last entry of any of the firewall we manage (DENY ALL is the one I'm afraid about).
But I can't even shit on Claude AI, because I used it to rewrite part of the tests, and analyse the solution to fix the race condition (and how to test it).
It's a good tool, but in the last few weeks I've been more and more mad about it.
Anyway. I use it to generate a shell. No logic inside, just data models, and functions prototypes. That help with my inability to start something new. Then I use it to write easy functions. Helpers I know I'll need. Then I try to tie everything together. I never hesitate to stop Claude and write specific stuff myself, add a new prototype/function, or delete code. I restart the context often (Opus is less bad about it, but still). Then I ask it about easy refactoring or library that would simplify the code. Ask for multiple solutions each time.
For your task, instead of a direct translation, try adding a "distillation" step in between. Have it take the raw format and distill the important parts to yaml or whatever, then take the distillation and translate that into the new format. That way you can muck with the yaml by hand before translating it back, which should make it easier to keep the intent without the spaghetti getting in the way. Then you can hand-wire any "complexities" into the resulting new code by hand, avoiding the slop it would more likely create.
It may even be worth having it write a parser/evaluator that does these steps in a deterministic fashion. Probably won't work, but maybe worth a shot. So long as it does each translation as a separate step, maybe at least one of them will end up working well enough, and that'll be a huge time saver for that particular task.
first off, drop the idea of coding "agents" entirely. semi-async death valley is not worth it, you will never get into the flow state with an "agent" that takes less than an hour to spin, and we did not learn how to make true async agents that run for this long while maintaining coherence yet. OpenAI is the closest in that regard, but they are still at a 20-minute mark, so I am not dropping the quotes for now.
another argument against letting LLM do the bulk of the job is that they output code that's already legacy, and you want to avoid tech debt. for example, Gemini still thinks that Kotlin 2.2 is not out, hence misses out on context parameters and latest Swift interoperability goodies. you, a human being, are the only one who will ever have the privilege of learning "at test time", without separate training process.
replace coding "agents" with search tools. they are still non-deterministic, but hey, both Perplexity and Google AI Mode are good at quick lookup of SvelteKit idioms and whatnot. plus, good old Lighthouse can point out a11y issues - most of them stem from non-semantic HTML. but if you really want to do it without leaving a terminal, I can recommend Gemini CLI with some search-specific prompting. it's the only CLI "agent" that has access to the web search to my knowledge. it's slower than Perplexity or even ChatGPT Search, but you can attach anything as a context.
this is the true skill of "how to use AI" - only use it where it's worth it. and let's be real, if Google Search was not filled with SEO crap, we would not need LLMs.
I've been heavily vibe coding for a couple of personal projects. A free kids typing game and bringing back a multiplayer game I played a lot as a kid back to life both with pretty good success.
Things I personally find work well.
1. Chat through with the AI first the feature you want to build. In codex using vscode I always switch to chat mode, talk through what I am trying to achieve and then once myself and the AI are in "agreement" switch to agent mode. Google's antigravity sort of does this by default and I think it's probably the correct paradigm to use.
2. Get the basics right first. It's easy for the AI to produce a load of slop, but using my experience of development I feel I am (sort of) able to guide the AI in advance in a similar way to how I would coach junior developers.
3. Get the AI to write tests first. BDD seems to work really well for AI. The multiplayer game I was building seemed to regress frequently with just unit tests alone, but when I threw cucumber into the mix things suddenly got a lot more stable.
4. Practice, the more I use AI the more I believe prompting is a skill in itself. It takes time to learn how to get the best out of an Agent.
What I love about AI is the time it gives me to create these things. I'd never been able to do this before and I find it very rewarding seeing my "work" being used by my kids and fellow nostalgia driven gamers.
> 4. Practice, the more I use AI the more I believe prompting is a skill in itself. It takes time to learn how to get the best out of an Agent.
This would have been my tip, as well.
Talk to others who are good with these tools to learn from what they're doing and read blogs/docs/HN for ideas, but most importantly, make time for yourself on a daily/weekly/monthly/whatever basis to practice with the tool.
It's taken me about a year of consistent practice to feel comfortable with LLM coding. It just takes time, like learning any other technology.
I will be crucified by this, but I think you are doing it wrong.
I would split it in 2 steps.
First, just move it to svelte, maintain the same functionality and ideally wrap it into some tests. As mentioned you want something that can be used as pass/no-pass filter. As in yes, the code did not change the functionality.
Then, apply another pass from Svelte bad quality to Svelte good quality. Here the trick is that "good quality" is quite different and subjective. I found the models not quite able to grasp what "good quality" means in a codebase.
For the second pass, ideally you would feed an example of good modules in your codebase to follow and a description of what you think it is important.
Ask people to do things for you. Then you will learn how to work with something/someone who has faults but can overall be useful if you know how to view the interaction.
Though remember that it's not a human. It's easy to waste a lot of time convincing it to do something in a certain way, then one prompt later it forgets everything you said and reverts back to its previous behavior. (Yes humans can do that too, but not usually to this level).
It's important (though often surprisingly hard!) to remember it's just a tool, so if it's not doing things the way you want, start over with something else. Don't spend too much time on a lost cause.
This isn't exactly an answer to your question but I've experienced some efficiency gains in using AI agents for pre-reviewing my PRs and getting it to create tests.
You still get to maintain the core code and maintain understandability but it helps with the tasks the take time that aren't super interesting.
There are very real limitations on AI coders in their current state. They simply do not produce great code most of the time. I have to review every line that it generates.
Follow and learn from peopel on youtube who formerly had the same skill level as you did now.
AI is great at pattern matching. Set up project instructions that give several examples of old code, new code and detailed explanations of choices made. Also add a negative prompt, a list of things you do not want AI to do based on past frustrations.
dont forget to include "pls don't make mistakes"
Voice prompts, restate what you want, how you want it from multiple vantage points. Each one is a light cone in a high dimensional space, your answer lies in their intersection.
Use mind altering drugs. Give yourself arbitrary artificial constraints.
Try using it in as many different ridiculous ways you can. I am getting the feeling you are only trying one method.
> I've had a fairly steady process for doing this: look at each route defined in Django, build out my `+page.server.ts`, and then split each major section of the page into a Svelte component with a matching Storybook story. It takes a lot of time to do this, since I have to ensure I'm not just copying the template but rather recreating it in a more idiomatic style.
Relinquish control.
Also, if you have very particular ways of doing things, give it samples of before and after (your fixed output) and why. You can use multishot prompting to train it to get the output you want. Have it machine check the generated output.
> Simple prompting just isn't able to get AI's code quality within 90%
Would simple instructions to a person work? Esp a person trained on everything in the universe? LLMs are clay, you have to mold them into something useful before you can use them.
In addition to what the sibling commenters are saying: Set up guardrails for what you expect in your project's documentation. What is the agent allowed to do when writing unit tests vs say functional tests, what packages it should never use, coding and style templates etc.
1. Introduce it to the code base (tell it: we're going to work on this project, project does X is written in language Y). Ask it to look at the project to familiarize.
2. Tell it you want to refactor the code to achieve goal Z. Tell it to take a look and tell you how it will approach this. Consider showing it one example refactor you've already done (before and after).
3. Ask it to refactor one thing (only) and let you look at what it did.
4. Course correct if it didn't do the right thing.
5 Repeat.
> prompting just isn't able to get AI's code quality within 90% of what I'd write by hand
Tale as old as time. The expert gets promoted to manager, and the replacement worker can’t deliver even 90% of what the manager used to. Often more like 30% at first, because even if they’re good, they lack years of context.
AI doesn’t change that. You still have to figure out how to get 5 workers who can do 30-70% of what you can do, to get more than 100% of your output.
There are two paths:
1. Externalized speed: be a great manager, accept a surface level understanding, delegate aggressively, optimize for output
2. Internalized speed: be a great individual contributor, build a deep, precise mental model, build correct guardrails and convention (because you understand the problem) and protect those boundaries ruthlessly, optimize for future change, move fast because there are fewer surprises
Only 1 is well suited for agent-like AI building. If 2 is you, you’re probably better off chatting to understand and build it yourself (mostly).
At least early on. Later, if you nail 2 and have a strong convention for AI to follow, I suspect you may be able to go faster. But it’s like building the railroad tracks before other people can use them to transport more efficiently.
Django itself is a great example of building a good convention. It’s just Python but it’s a set of rules everyone can follow. Even then, path 2 looks more like you building out the skeleton and scaffolding. You define how you structure Django apps in the project, how you handle cross-app concerns, like are you going to allow cross-app foreign keys in your models? Are you going to use newer features like generated fields (that tend to cause more obscure error messages in my experience)?
Here’s how I think of it. If I’m building a Django project, the settings.py file is going to be a clean masterpiece. There are specific reasons I’m going to put things in the same app, or separate apps. As soon as someone submits a PR that craps all over the convention I’ve laid out, I’m rejecting aggressively. If we’ve built the railroad tracks, and the next person decides the next set of tracks can use balsa wood for the railroad ties, you can’t accept that.
But generally people let their agent make whatever change it makes and then wonder why trains are flying off the tracks.
> But generally people let their agent make whatever change it makes and then wonder why trains are flying off the tracks.
IMO, this is the biggest issue. Well, along with just straight up ignoring what you tell it and doing whatever it thinks should be done.
But, to answer the actual thread question: Make it work (all the tests pass) then make it right is the way I'm getting quality work out of the robots. As long as you watch them to make sure they don't either change the tests to pass on buggy code or change the code to pass on buggy tests (yes, Claude is quite proficient and eager to do both) then the code gets better and better as new stuff is added and the 'flow of computation' is worked out.
Oh, and have an actual plan to follow so they don't get distracted at the first issue and say they're finished because they fixed some random unrelated bug. I've also found it helpful to have them draft up such a plan while they're knee deep in that section of the code for related work so they don't have to figure it all out again from scratch and try to add a few extra levels of abstraction just because.
> This kind of work seems like a great use case for AI assisted programming
Always check your assumptions!
You might be thinking of it as a good task because it seems like some kind of translation of words from one language to another, and that's one of the classes of language transformations that LLM's can do a better job at than any prior automated tool.
And when we're talking about an LLM translating the gist of some English prose to French, for a human to critically interpret in an informal setting (i.e not something like diplomacy or law or poetry), it can work pretty well. LLM's introduce errors when doing this kind of thing, but the broader context of how the target prose is being used is very forgiving to those kinds of errors. The human reader can generally discount what doesn't make sense, redundancy across statements of the prose can reduce ambiguity or give insight to intent, the reader may be able to interactively probe for clarifications or validations, the stakes are intentionally low, etc
And for some kinds of code-to-code transforms, code-focused LLM's can make this work okay too. But here, you need a broader context that's either very forgiving (like the prose translation) or that's automatically verifiable, so that the LLM can work its way to the right transform through iteration.
But the transform you're trying to do doesn't easily satisfy either of those contexts. You have very strict structural, layout, and design expectations that you want to replicate in the later work and even small "mistranslations" will be visually or sometimes even functionally intolerable. And without something like a graphic or DOM snapshot to verify the output with, you can't aim for the iterative approach very effectively.
TLDR; what you're trying to do is not inherently a great use case. It's actually a poor one that can maybe be made workable through expert handling of the tool. That's why you've been finding it difficult and unnatural.
If your ultimate goal is to improve your expertise with LLM's so that you can apply them to challenging use cases like this, then it's a good learning opportunity for you and a lot of the advice in other comments is great. The most key factor being to have some kind of test goal that the tool can use for verify its work until it strikes gold.
On the other hand, if your ultimate goal is to just get your rewrite done efficiently and its not an enormous volume of code, you probably just want to do it yourself or find one of our many now-underemployed humans to help you. Without expertise that you don't yet have, and some non-trivial overhead of preparatory labor (for making verification targets), the tool is not well-suited to the work.
Hey, I am bgwalter from the anti-AI industrial complex, which is a $10 trillion industry with a strong lobby in DC.
I would advise you to use Natural Intelligence, which will be in higher demand after the bubble has burst completely (first steps were achieved by Oracle this week).
You can using a single simple step: don't
The more you use IA, the more your abilities decreases, the less you are able to use IA
This is the law of cheese: the more cheese, the more holes; The more holes, the less cheese; Thus, the more cheese, the less cheese;
This is the fastest way to unemployment benefits (if that is the goal).
This is just meaningless knee-jerking, try making an actual argument. At least the GP is arguing that more use of AI leads to loss of personal coding skills. It's unclear at this point what level AI will grow to, i.e. it could hit a hard wall at 70% of a good programmer's ability, and in that case you would really want those personal coding skills since they'll be worth a lot. It could also far exceed a good programmer, in which case the logic reverses and you want those AI handling skills…
NB: I'm talking about skill cap here, not speed of execution. Of course, an AI will be faster than a programmer… *if* it can handle the job, and *if* you can trust it enough to not need even more time in review…
"This is just meaningless knee-jerking,"
Your point is valid.
"AI leads to loss of personal coding skills"
Unfortunately, I can no longer do long division. No one will pay me to do long division and I have a calculator now. I could stay sharp at long division for a hobby though. Keep those for loops sharp if you want, but I don't see people paying you to hand code. Eventually, it will just be a liability. (like not using a calculator).
"it could hit a hard wall at 70% of a good programmer's ability"
That is not what NVDA,AMZN,GOOG,or MSFT believe. Maybe you are right and they are all wrong. They do have some smart people on staff. But, betting against the sp50 is generally a terrible plan.
> Keep those for loops sharp if you want, but I don't see people paying you to hand code.
Well, personally speaking, I'm paid to hand code; LLMs have not reached the quality of my code output yet and I'm seeing no pressure at all to use LLMs.
Relatedly, I work on an open source project where the constraining resource is review (as it is in most open source projects.) The current state is that LLM generated code is incredibly hard and annoying to review and there is a lot of pushback.
So, I'm going to wait and see.
(...especially since there's also legal challenges to LLMs trained on open source code with no regard to its licenses.)
There have been lots of tools that have made programming more efficient. Probably most programmers have used some of those tools, but very few have used every tool. Why do you suppose that LLMs in particular must be used?
LLMs aren't calculators; for example, your calculator always gives you the same outputs given the same inputs.
Long division is a pretty simple algorithm that you can easily and quickly relearn if needed even your LLM of choice can likely explain that to you given there's plenty of writing about it in books and on the internet.
Have we really reached the point where a candidate gets outright rejected for not using AI tools, without taking personal aptitudes into consideration?
Whose personal aptitudes could possibly match those of Claude the Magnificent?
It wouldn’t surprise me if resume filters now look for how many times AI buzzwords are present.